User Manual ARK-DS762 3rd Gen Intel® Core™ i7/i5/i3 processor-based Digital Signage Player
Copyright The documentation and the software included with this product are copyrighted 2012 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.
Technical Support and Assistance 1. 2. Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Safety Instructions 1. 2. 3. Read these safety instructions carefully. Keep this User Manual for later reference. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation.
Packing List Before installation, please ensure the following items have been shipped: 1 x ARK-DS762 Unit 1 x Power Adaptor 1 x Driver/Utility CD/manual 1 x China RoHS 1 x Traditional Chinese User Manual for CCC Optional Power Cord & Accessories Part Number 1700001524 170000183C 170203180A 1700008921 1700019146 ARK-DS762 User Manual Description 3-pin power cord (US) 3-pin power cord (EU) 3-pin power cord (UK) 3-pin power cord (PSE) 3-pin power cord (CCC) vi
Contents Chapter 1 General Introduction ...........................1 1.1 1.2 Introduction ............................................................................................... 2 Product Features....................................................................................... 2 1.2.1 General ......................................................................................... 2 1.2.2 Display ..........................................................................................
2.4.4 Chapter Cfast card installation ................................................................. 12 Figure 2.12Cfast card installation ............................................... 12 3 BIOS Settings .................................... 13 3.1 3.2 BIOS Introduction.................................................................................... 14 Main Setup.............................................................................................. 14 3.2.1 System Time / System Date ....
Chapter 1 1 General Introduction This chapter gives background information of ARK-DS762 series.
1.1 Introduction ARK-DS762 is powered by 3rd Gen Intel® Core™ i7/i5/i3 processors with Intel® HD Graphics for Full HD video playback performance. ARK-DS762 is a media player that delivers advanced graphics performance for all your signage applications. ARK-DS762 has 3 HDMI video output interfaces with CEC function to provide multi display outputs simultaneously.
General Introduction 1.4 Mechanical Specifications 1.4.1 Dimensions 249.6 x 190.0 x 35.0 mm (9.83" x 7.48" x 1.38") (L x W x H) Figure 1.1 ARK-DS762 Mechanical Dimensions 1.4.2 Weight 2.0 kg (4.41 lb) 3 Chapter 1 – Speed: 10/100/1000 Mbps – Interface: 1 x RJ-45 jacks with LED – Standard: IEEE 802.3z/ab (1000 Base-T) or IEEE 802.
1.5 Power Requirements 1.5.1 System Power Minimum power input: DC 19V, 4.74A 1.5.2 RTC Battery 3V/200 mAH BR2032 1.6 Environmental Specifications 1.6.1 Operating Temperature 0° C - 40° C (32~104° F) 1.6.2 Relative Humidity 95% @ 40° C (non-condensing) 1.6.3 Storage Temperature -20~70° C (-4~167° F) 1.6.4 Vibration Loading During Operation 0.5 Grms, IEC 60068-2-64, random, 5 ~ 500 Hz, 1 Oct./min, 1 hr/axis. 1.6.5 Shock During Operation 20 G, IEC 60068-2-27, half sine, 11 ms duration 1.6.
Chapter 2 2 Hardware Installation This chapter introduces external I/ O and the installation of ARKDS762 Hardware.
2.1 ARK-DS762 I/O Connectors Figure 2.1 Front and rear view 2.2 ARK-DS762 Front Side External I/O Connectors 2.2.1 Power ON/OFF Button ARK-DS762 has a power ON/OFF button on front side. Push this button to turn the system ON and OFF. It can also support 4 second delay soft power off. Figure 2.2 Power button 2.2.2 COM Connector ARK-DS762 provides one D-sub 9-pin connector serial communication interface port. The port can support RS-232 mode communication. 1 2 3 4 5 6 7 8 9 Figure 2.
Chapter 2 Table 2.1: COM Port Pin Assignments Signal Name 1 DCD 2 RxD 3 TxD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI 2.2.3 USB Connectors The ARK-DS762 provides two USB interface connectors (2 x USB 2.0 in front-side; and 1 x USB 3.0 in rear-side), which give complete Plug & Play and hot swapping capability for up to 127 external devices. The front side two USB interface is compliant with USB UHCI, Rev. 2.0. and the rear one is compliant with USB UHCI, Rev. 3.0.
2.3.2 Ethernet Connector (LAN) ARK-DS762 provides one RJ45 LAN interface connector, it is fully compliant with IEEE 802.3u 10/100/1000 Base-T CSMA/CD standards. The Ethernet port provides a standard RJ-45 jack connector with LED indicators on the front side to show its Active/Link status and speed status. Figure 2.6 LAN connector Table 2.
ARK-DS762 3 HDMI (High-Definition Multimedia Interface) connectors provide alldigital audio/video interface to transmit the uncompressed audio/video signals and is HDCP and CEC compliant. Connect the HDMI audio/video device to this port. HDMI technology can support a maximum resolution of 1920 x 1080p but the actual resolutions supported depends on the monitor being used. Hardware Installation Figure 2.7 HDMI connector Table 2.
2.4 Hardware Installation 2.4.1 HDD installation 1. 2. Open the side top cover. (the one with ARK-DS762 logo) Fix the HDD to the HDD bracket on the housing and attach with screws. Figure 2.9 HDD installation 2.4.2 CPU and Memory (CPU side) installation 1. 2. 3. Open the side cover (no ARK-DS762 logo) and the middle top cover. The memory module can be installed and removed. Loosen the 4 screws on the thermal module and remove the thermal module.
Chapter 2 Hardware Installation Figure 2.10 CPU and top-side memory installation 2.4.3 MiniPCIe and Memory (Bottom side) installation 1. Open the bottom covers. Install/Remove bottom side memory module and MiniPCIe module.
Figure 2.11 Mini PCIe and bottom-side memory installation 2.4.4 Cfast card installation 1. 2. 3. Open the Cfast card loader with remove the 2 screws on it. Put the Cfast card on the Cfast card loader and slide in the slot. Close the Cfast card loader bracket on the front panel and fasten the 2 screws. Figure 2.
Chapter 3 3 BIOS Settings This chapter introduces how to set BIOS configuration data.
3.1 BIOS Introduction AMIBIOS has been integrated into many motherboards for over two decades. With the AMIBIOS Setup program, you can modify BIOS settings and control various system features. This chapter describes the basic navigation of the ARK-DS762 series BIOS setup screens. AMIBIOS's ROM has a built-in setup program that allows users to modify the basic system configuration. This information is stored in battery-backed CMOS so it retains the setup information when the power is turned off. 3.
Select the Advanced tab from the ARK-DS762 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screens are shown below. The sub menus are described on the following pages. Chapter 3 3.2.
S5 RTC Wake Settings Enable system to wake from S5 using RTC alarm Figure 3.
Figure 3.4 CPU Setup screen 17 ARK-DS762 User Manual BIOS Settings CPU Configuration – Hyper-threading: Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When disabled, only one thread per enabled-core is enabled. – Active Processor Cores: Number of cores to be enabled in each processor package. – Limit CPUID Maximum: Disabled for Windows XP.
SATA Configuration This section allows you to set up SATA devices configuration. – SATA Controller(s): Enable or disable SATA Device. – SATA Mode Selection: Determines how SATA controller(s) operate. The choice: IDE, AHCI, RAID Figure 3.
PCH-FW Configuration Configuration Management Engine Technology Parameters. Intel Anti-Theft Technology Configuration: Disabling Intel AT Allow user to login to platform. This is strictly for testing only. This does not disable AT Services in ME. – Intel Anti-Theft Technology: Enable/Disable Intel AT in BIOS for testing only. – Intel Anti-Theft Technology Recovery: Set the number of times Recovery attempted will be allowed. Range: 1- 64 Chapter 3 BIOS Settings Figure 3.
AMT Configuration Configuration Active Management Technology parameters. – Intel AMT: Enable/Disable Intel(R) Active Management Technology BIOS Extension. – Note: iAMT H/W is always enabled. This option just controls the BIOS extension. If enabled, this requires additional firmware in the SPI device. – BIOS Hotkey Pressed: OEMFLag Bit 1: Enable/Disable BIOS hotkey press. – MEBx Selection Screen: OEMFLag Bit 2: Enable/Disable MEBx selection screen.
Figure 3.8 USB Configuration setup screen 21 ARK-DS762 User Manual BIOS Settings USB Configuration USB Configuration Parameters. – Legacy USB Support: Enable Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications – EHCI Hand-off: This is a workaround for 0Ses without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver.
Embedded Controller Configuration System Embedded Controller Chip Parameters. – Power Saving Mode: Select ITE8518 Power Saving Mode. The choice: Normal, Deep Sleep – Resume on Ring: Enable/Disable Resume on Ring Function – Serial Port 0 Configuration: Set parameters of serial port 0 (COM) – Serial port: Enable/Disable – Change setting: Select an optimal setting for super IO device. – Device mode: Normal/High speed – H/W Monitor: Monitor hardware status Figure 3.
Chapter 3 BIOS Settings Figure 3.10 Serial Port 0 Configuration setup screen Figure 3.
Serial Port Console Redirection: – Console Redirection: Enable/Disable CPU PPM Configuration CPU PPM Configuration Parameters – EIST: Enable/Disable Intel SpeedStep – Turbo Mode: Turbo Mode – CPU C3 Report: Enable/Disable CPU C3(ACPI C2) report to OS – CPU C6 Report: Enable/Disable CPU C6(ACPI C3) report to OS – CPU C7 Report: Enable/Disable CPU C7(ACPI C3) report to OS – ACPI T State: Enable/Disable ACPI T State support Figure 3.
3.2.4 Boot BIOS Feature Setup Select the Boot tab from the ARK-DS762 setup screen to enter the Boot BIOS Setup screen. Users can select any item in the left frame of the screen. Figure 3.13 Boot configuration setup screen 25 ARK-DS762 User Manual BIOS Settings Select the Chipset tab from the ARK-DS762 setup screen to enter the Chipset BIOS Setup screen. Users can select any item in the left frame of the screen.
Setup Prompt Timeout: Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Bootup NumLock State: Select the keyboard NumLock state Ouiet Boot: Enable or disable Quiet Boot option Fast Boot: Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options. Option ROM Messages: Set display mode for option ROM.
Select the Save & Exit tab from the setup screen to enter the Save & Exit BIOS Setup screen. Chapter 3 3.2.6 Save & Exit BIOS Feature Setup BIOS Settings Figure 3.15 Save & Exit configuration setup screen Save Changes and Exit: Exit system setup after saving the changes. Discard Changes and Exit: Exit system setup without saving any changes. Save Changes and Reset: Reset the system after saving the changes. Discard Changes and Reset: Reset system setup without saving any changes.
ARK-DS762 User Manual 28
Appendix A SUSIAccess Introduction A
A.1 SUSIAccess® - Remote Device Management Advantech has designed an industrial remote management program to provide our customers with remote device monitoring, desktop connection, system recovery and system protection features that will help customers to access multiple clients through a single console for remote device management.
System Recovery: Controls system backup and restore of remote devices, or pre-set system backup types and restore times. For example, a bank ATM machine is set for system backup every Monday at 1:00 am. If a system crashes, you can immediately gain access via the remote console, and perform a system recovery so that the equipment maintains normal operation. (System recovery programs use Acronis True Image backup and restore technology which must be installed before use.
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.