AIM-37AT Computer User Manual V1.
Copyright The documentation and the software included with this product are copyrighted 2016 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Declaration of Conformity CE Conformity Statement Radio products with the CE alert marking comply with the R&TTE Directive (1999/5/EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards).
1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. 15.21 Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
antenna types listed below with the maximum permissible gain and required antenna impedance are strictly prohibited for use with this device. Le present emetteur radio a ete approuve par Industrie Canada pour fonctionner avec les types d'antenne enumeres ci-dessous et ayant un gain admissible maximal et l'impedance requise pour chaque type d'antenne.
Safety Instructions 1. Read these safety instructions carefully. 2. Keep this user manual for later reference. 3. Disconnect this equipment from AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. 4. Keep this equipment away from hazard locations. 5. Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause damage. 6.
fire or explosion. Battery Charge Notice It is important to consider the environment temperature whenever you are charging the Lithium-Ion battery pack. The process is more efficient at normal room temperature or slightly cooler. It is essential that you charge batteries within the stated range of 0°C to 40°C. Charging batteries outside of the specified range could damage the batteries and shorten their charging life cycle.
– Product name and serial number – Description of your peripheral attachments – Description of your software (operating system, version, application software, etc.
TABLE OF CONTENT Chapter 1 Introduction ............................................................................................. 11 1.1 Symbols Used in this Manual ......................................................................................... 12 1.2 Product Features ........................................................................................................... 12 1.3 Package Contents .................................................................................................
5.1 Maintaining the LCD Display.......................................................................................... 31 5.2 Cleaning the AIM-37AT.................................................................................................. 31 5.3 Trouble Shooting ........................................................................................................... 31 5.4 ENERGY STAR ...............................................................................................................
Chapter 1 Introduction Congratulations on your purchase of the AIM-37AT Computer. AIM-37AT has two variants and the difference is the optional peripherals at the right side of the device. AIM-37AT-MXXXXXXXXXXXXXX: AIM-37AT-SXXXXXXXXXXXXXX: MSR and IC Card Reader slots are The card reader slots are sealed off and embedded at the right side. replaced by volume keys.
1.1 Symbols Used in this Manual Denotes information that must be observed. Failure to do so may result in personal harm or damage to the product. Denotes information that must be observed. This is informative notification to have a better experience while using this computer. 1.2 Product Features • Semi-rugged stylish design with only 17.4mm in thickness. • Low power Intel® ATOM ™ processor designed for mobile applications. • Rich Built-in WLAN/Bluetooth/NFC wireless communications. • 10.
1.4 Product Specifications 1.4.1 Technical Specifications Model Name Processor AIM-37AT-MXXXXXXXXXXXXXX CPU AIM-37AT-SXXXXXXXXXXXXXX Intel Atom X5-Z8350, quad-core processor, 1.92 GHz OS Windows 10 IoT Enterprise 64 bit Windows 10 IoT Enterprise 64 bit Android 6.0.1 64 bit Memory 2 GB DDR3L Storage 32 GB eMMC Audio System Speaker, 3.5mm headset jack Size / Type Glass Type Max.
management IC Card 5V smart card; ISO/IEC 7816-1, 2, 3, 4; T=0 & N/A Reader T = 1; Sensors G-sensor + E-compass, Gyroscope, Ambient Light Sensor Data Collection 1D/2D barcode scanner (optional) 5M pixel auto-focus main camera with flash LED 2M pixel fixed-focus front camera Dimensions 290 x 176 x 17.4 mm Weight with 915g 900g Battery Power Battery Operating Li-Polymer Battery, 3.8V@7900 mAh (typ.
1.4.2 Product Outlook and Dimensions All AIM-37AT Series share the same dimension, the following illustration uses AIM-37AT-MXXXXXXXXXXXXXX as example.
1.5 Exploring the AIM-37AT 1.5.1 Front View 1 23 4 5 No.
1.5.2 Rear View 1 2 3 4 4 4 4 5 No. Component 1 Barcode scanner trigger or programmable button 2 Rear Camera with LED Flash 3 Power button 4 M6 screw holes 5 Speaker 1.5.3 Right View 1.5.3.1 AIM-37AT-MXXXXXXXXXXXXXX 1 2 No.
1.5.3.2 AIM-37AT-SXXXXXXXXXXXXXX 2 No. 1 Component 1 Volume Up 2 Volume Down 1.5.4 Left View 1 2 No.
1.5.5 Top View 1.5.5.1 AIM-37AT-MXXXXXXXXXXXXXX 1 No. 2 3 Component 1 Guide pin 2 Micro SD slot 3 Barcode scanner 4 MSR slot 1.5.5.2 AIM-37AT-SXXXXXXXXXXXXXX 1 No.
1.5.6 Bottom View 1.5.6.1 AIM-37AT-MXXXXXXXXXXXXXX 1 2 1 No. 3 4 Component 1 Guide pin 2 Pogo Pin (Reserved for future docking usage) 3 Micro USB 4 MSR slot 1.5.6.2 AIM-37AT-SXXXXXXXXXXXXXX 1 2 No.
Chapter 2 Getting Started 2.1 Charge the Computer To charge the embedded battery in AIM-37AT, connect the Micro USB adaptor on the AIM-37 computer. Micro USB Connector Please charge for at least one hour when you use this computer for the first time. 2.2 Turn on the Computer Push the Power Button (located at no. 3 of Section 1.5.2 Rear View.) for 3 seconds to start the computer.
2.3 Sleep Mode While the computer is running, push the Power Button for 1 second will move the equipment into sleep mode for power saving. Push the Power Button again will enable the backlight again. 2.4 Operate the computer AIM-37AT is equipped with a 10.1” Capacitive Touch Panel. Use finger to touch the following Active Area to operate the computer. Active Area 2.5 LED indicator status AIM-37AT is equipped with two LED indicators. The following tables show LED status of each indicator. 2.5.
2.5.2 Barcode scanner status LED When barcode scanner is installed on the computer, barcode scanner status LED (orange) blinks when data is received.
Chapter 3 Basic Setups WLAN access requires a separate purchase of an access point. Contact a wireless service provider for more information. Screens used in this manual are for illustrative purposes only. Actual screens may vary depending on your product version and pre-installed Operating System versions.
3.1 Windows 10 IoT Enterprise Basic Setups Windows 10 IoT Enterprise Home Screen 1 2 No.
3.2 Android 6.0.1 Basic Settings Android 6.0.1 Home Screen 1 3 2 No.
Tap top of the screen and scroll down for Settings menu 5 6 7 8 No.
Chapter 4 Running applications 4.1 Installing applications There are multiple ways to install applications on AIM-37AT and this section shows the steps to install applications via Micro SD cards. 1. Before installation, please ensure your Micro SD card has been correctly formatted with FAT32 file system. 2. Copy .exe (Windows) or .apk (Android) on the Micro SD card. 3. Open the Micro SD card slot on the top of the device and inset the card.
4.1.1 Install applications with Windows 10 IoT Enterprise a) Go to Program Launcher b) Launch File Explorer and will find Secure Digital storage device (D:) c) Tap Secure Digital storage device (D:) to find .exe executable file. d) Tap .exe file to install the application.
4.1.2 Install applications with Android 6.0.1 a) Go to Settings b) Go to Storage & USB c) Choose SD Card d) Tap .
Chapter 5 Maintenance 5.1 Maintaining the LCD Display • Do not scratch the surface of the screen with any hard objects. • Do not spray liquid directly on the screen or allow excess liquid to drip down inside the device. • Do not place anything, such as food and drink, on the screen at any time to prevent damage to the screen. • Clean the LCD display only with a soft cloth dampened with denatured alcohol or a proprietary LCD screen cleaner. 5.2 Cleaning the AIM-37AT 1.
etc.) A complete description of the problem. The exact wording of any error messages. Symptoms, photo or video if available. 5.4 ENERGY STAR An ENERGY STAR qualified computer delivers substantial savings over a conventional computer. Desktop, integrated desktop, and notebook (laptop) computers, workstations, small-scale servers, and thin clients are all eligible to earn the ENERGY STAR, and those that do are now more efficient than ever. It is an honor for Advantech to provide you such products.
The product is to enter display sleep mode after 4 minutes and computer sleep mode after 10 minutes in default, to wake it from sleep mode, simply press the power button on the back cover, while under sleep mode it allows the device to save 80% or more energy. Power Management System: Default mode is on balanced, after idle for 4 minutes, it will automatically shuts its Monitor and enter sleep mode if idle for more than 10 minutes. Lists of default power management systems: Balanced Idle 4 min.