Unpacking and device check Please take the radio out of the package carefully and before disposing of the packing materials, check the accessories according the the following list. If any part is lost or damaged, please submit a claim letter to the carrier or deliverer. Accessories: Items Quantity Antenna 1 Belt clip 1 Power supply 1 Battery 1 Charger 1 Lanyard 1 Instruction manual Available at www.advancedwireless.com Warranty card Available at www.advancedwireless.
Charging the Battery Use only the charger and battery specified by Advanced Wireless Communications. Charger LED can indicate the charging process.
LCD icons Icon Name Icon Display Status Description VOX Voice operated function. Emergency alarm The radio is in an emergency alarm state or receives an emergency alarm. Battery power Display remaining battery power. Transmitting indicator The radio is transmitting. The radio is receiving signal. Signal indicator No signal. Current channel power is low power. Transmit power Current channel power is high power. Speaker Squelch and speaker turned on. Monitor Has enabled monitoring.
Product operation instructions Keyboard introduction The AWR-D7500 has three keyboard modes: channel number mode, DTMF mode, and call ID. Users can select different keyboard modes according to their needs, thus achieving simple and fast operation. Channel number mode: After the user selects the channel number mode, the required channel number can be directly written through the keyboard, and the Radio automatically jumps to this channel.
4. Programmable function key function There are four programmable function keys that may be defined in software. These buttons are noted as K1, K2, K3, and TK. Programmable buttons can be modified by the CPS.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
When worn on the body, always place the radio in a approved holder, holster, case, or body harness or by use of the correct clip for this product. Use of non-approved accessories may result in exposure levels which exceed the FCC's occupational/controlled environmental RF exposure limits. Use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure guidelines. Contact your local dealer for the optional accessories of the product.