Product Info

18/05/2020 3. Quick Start Sensor(s) V2 – FieldWiz Help

https://help.fieldwiz.com/knowledgebase/4-quick-start-sensors-v2/ 1/2

3. Quick Start Sensor(s) V2

Before the Game

Make sure you have configured your sensor with a player. See related section for more

information.

First, turn on the sensor by pressing the button. The LED will start blinking slowly. Let it finds the

GPS signal until the LED starts blinking faster. This operation should take up to 2 minutes

maximum.

It is required for the proper functioning of the device to check its position on each player and that

the LED is ON (In the right position you can read the number and see the LED).

LED

color

Blinking

speed

Functions

Red Slow Synchronizing with GPS signal

Red Fast Synchronized and ready to use

Green Slow Synchronizing with GPS signal and

measuring the heart rate the Wiz Shirt

Green Fast Synchronized and ready to use with the

Wiz Shirt

Blue Slow The sensor is charging

Blue Stays

The sensor is fully charged

PAGE 1
8/05/2020 3. Quick Start Sensor(s) V2 – FieldWiz Help 3. Quick Start Sensor(s) V2 Before the Game Make sure you have configured your sensor with a player. See related section for more information. First, turn on the sensor by pressing the button. The LED will start blinking slowly. Let it finds the GPS signal until the LED starts blinking faster. This operation should take up to 2 minutes maximum.
PAGE 2
18/05/2020 3. Quick Start Sensor(s) V2 – FieldWiz Help After the Game Turn off the sensor by pressing the button 3 consecutive times. The LED turns off. Proceed with the data synchronization by connecting it to your computer with the USB-C cable or to the Docking V2 station. FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.