User Manual

CHECK SIGNAL LEVELS

HOLD VFD FOR 5 SECONDS TO ENTER BAND MODE

CONNECT POWER CABLES, AND POWER ON

SELECT BANDWIDTH & BAND

CHECK UL/DL NUMBERS

CONNECT ANTENNAS/CABLES

DONOR

SERVER

REPEATER PLACEMENT

SERVER

DONOR

Delos200 Quick Start Guide

Quick

Install

Guide

FRONT VIEW

TOP VIEW

Bandwidth

Selection

Band

Selection

Display Screen (Cycles Information)

Documentation and Software can be found on the CD-ROM

included in the Delos box.

Technical Support

Contact ADRF’s Technical Support Team for assistance with:

-Software Questions

-Setting up the Delos

-Delos Operation

-Troubleshooting Questions

1-323-254-8131

1-800-313-9345

www.adrftech.com

PAGE 1
Delos200 Quick Start Guide 1 2 3 SERVER DONOR DONOR SERVER TOP VIEW Quick Install Guide FRONT VIEW REPEATER PLACEMENT 4 5 CONNECT ANTENNAS/CABLES 6 Bandwidth Selection CONNECT POWER CABLES, AND POWER ON 7 HOLD VFD FOR 5 SECONDS TO ENTER BAND MODE 8 SELECT BANDWIDTH & BAND Documentation and Software can be found on the CD-ROM included in the Delos box.
PAGE 2
Delos200 Quick Start Guide 1 OPEN THE BOX The box should contain: 1 1 1 1 1 - Delos Series Repeater CD (Software and User Guide) USB Cable AC/DC Power Adapter Quick Install Guide Sheet 4 POWER Plug in the power converter. (110VAC Adapter) 2 REPEATER PLACEMENT Locate the place where you will put the Delos. You can hang the Delos or put it on anything. In any case, make sure the Delos is securely fastened to a wall or any structure so that it won’t move.