Annex No.
Mod. AAE-DOC04/1 Rev. 1_01 HANDHELD READER HH500 Users Interface Description AFG ASIA ENGINEERING CO.LTD. 65/12 M.10 T.Tonpao A.Sankumpang Chiangmai, Thailand 50130 Tel: +66 53 390 909 Fax: +66 53 390 910 Website : WWW.AAE.CO.
Contents : 1. Change Keyboard picture ..................................................................................... 3 1. Support Bluetooth Module .................................................................................... 3 1. FCC Statement ..................................................................................................... 3 1. Pictures of UHF RFID Handheld Reader HH500 .............................................. 3 2. Pre-installation Precautions .......................
1_05 1_06 1_07 2007-01-23 2007-04-07 2008-03-13 Mark Sukdee Mark Sukdee Soemsak Lpps 1. Change Keyboard picture 1. Support Bluetooth Module 1. FCC Statement 1. Pictures of UHF RFID Handheld Reader HH500 1. Side of Handheld Reader 3. Side of Handheld Reader Antenna Battery Cover Strap lock Package Contents 1. Handheld Reader HH800 (please see left pictures) 2. RS232 Communication cable Start Switch 3. Switching Power supply 4. Side of Handheld Reader 2.
• 2. Pre-installation Precautions Take note of the following precautions before you connect the RFID Reader components together or change any RFID Reader setting precautions before you connect the RFID Reader components together or change any RFID Reader setting • Don’t open any of the components. Opening them may cause severe damage to the reader and components. • Hold components tightly and don’t drop any components (they are breakable). • Charge handheld module at least 14 hours before first use.
. Keyboard The unit has a START key on the handle and a foil keyboard with the following keys: The function of the keys are: START 0..9 TYPE OK to start reading or writing tags. for manual entry of Owner, TAG_ID or data or to write action codes to the memory. short pressed, to access manual tag ID entry with keys 0..9 and A..F for ISO 6B and EM tags (no function for the others). If pressed long (>1 second) it will allow to change the tag type to be read.
.3 Selecting the kind of tags to read The unit must be ON for this function to be performed. The HH500 is capable of reading the following protocols: - EM - ISO16000-6B - EPC Class 0 - EPC Class 1 - EPC Class 1 Gen 2 - EPC 119 To select the type you desire press and hold for 1 second the TYPE key. The display informs the current selected format(s). 7.5 Reading TAG IDs Each tag has a unique identification number – TAG ID. To read the TAG ID proceed as follows: - make sure the right format is selected.
031 Finish - you can follow the write procedure acoustically and visually on the display: the unit writes the number of bytes as defined in the configuration (see chapter Configuration). - if the write counter on the top line stops (write problems) you can exit the write procedure by pressing the E / IDs key and restart from the beginning. 7.8 Reading user data from tags 058000SC13824961 Read ABCDEF Read 7.9 To read the user data from tags press the C / READ key.
7.14.1 Downloading with an SD card Copy.. FINISH This is the easiest method to download the data to a PC. - switch ON the unit - insert the SD card on the respective slot until it clicks in. (FAT16 format SD card) - the display shows COPY while the records are being copied. - when the copy finishes, a file named AAE_nnnn.AAE is created (nnnn is an order number) on your SD card. Thus you can download this file with “RFID Note” (PC application) for your further use.
8.4 Language 8.7 Reader ID The HH500’s display can be configured to operate in several languages. The language options depend on the destination countries. Please contact your Advanced ID distributor for the suitable languages of your application. Each HH500 can be assigned an own identification to enable identifying it in an application with several readers. The reader ID is 8 bytes long that can be assigned as you like.(see Support software) 8.5 8.
9.1 Dot Net Frame work 2 (manual installation) This step is required if your PC does not already have .Net Framework v1 (only) already installed. If it does, setup software will skip to next section. To install Dot Net Framework 2.0 - double click the Dot Net Framework 2.0.exe icon (as left picture) - follow the instructions in dialogue boxes until installation is finish. (as lower picture) 9.
9.2.2 Start RFID Note Connection tab Ready connection To start RFID Note - connect the Unit to PC with RS232 communication cable. (male side connect to unit and female side connect to pc) - switch “ON” the unit - double click on RFID Note icon (as a left picture) - then RFID Note starting window (see lower picture) and Connection tab window will appear. Note : RS232 communication cable is in the reader package. (see package contents) 9.2.
9.2.4 Download tab Download tab Download button Grouping area This tab is use for management the data from the unit. For example; - download tag ID read by unit. (you can download all the data or select from the specific address ) - download data from SD card. - make a online(real time) communication between unit an pc. - edit tag data, etc. To download all data from the unit; - click on Download button. - then all data read by unit will be downloaded into your pc automatically.
9.2.5 Reader Setting tab This tab is allow you to change configuration and set up the unit with firmware 5.00 and further. Some commands will erase all data and failure to follow instructions correctly may cause severe damage to the unit’s memory and may permanently erase your data. 9.2.5.
9.2.6 Write EPC tag tab This tab is use for command unit to write data into EPC tag. 9.2.6.1 Set data length and start address First of all you need to set data length and start address to match EPC data format. - input value into Start data Address box - input value into Data length box - click on Set button You can the set value to default value by - clicking on Set default for writing EPC Gen 2 tag button.
9.2.7 Write ISO tag tab This tab is use for command unit to write data into ISO tag. 9.2.7.1 Set data length and start address First of all you need to set data length and start address to match EPC data format. - input value into Start data Address box - input value into Data length box - click on Set button You can the set value to default value by - clicking on Set default for writing ISO tag button. - You need to confirm setting because changing these value will erase all data in the unit’s memory.
9.2.8 Tag Note Tab 9.2.9 Help tab You can add more tag details which you read by unit in this tab and the tag data will be stored in database. You can access to this tab by double click on any row of Tag ID when you are in Download tab. This tab contains Users Interface Description documents, RFID Note software details others support software descriptions, and Firmware support details.
9.3.2 FlashSTA Firmware path will here FlashSTA is a free programming software that is used for reprogramming a new firmware to RFID Handheld Reader HH500. It will be automatically installed into your pc when you install RFID Note. - click on Refer… button to browse a new firmware file you want to program. - double click on Launch FlashSTA.
Progress windows will show programming status; Program, and Read check. 10. Bluetooth Interface (PC Applications) This chapter describes how to communicate to HH500 with Bluetooth interface instead of RS232 connection. You can use all functions in RFID Note with the Bluetooth interface as same as RS232 interface. Note : RFID Note version 1.14 demo support Bluetooth interface. 10.1 Bluetooth driver installation and setting Bluetooth interface require driver installation and setting before use. 10.1.
This picture shows Bluetooth properties. This picture shows how to enter Security code. Bluetooth Serial port (virtual serial port) Enter 1111 here COM Port : COM4 This picture shows the present Bluetooth device is a virtual serial port. And it work as a serial COM port 4. 8. A When Bluetooth is connected an icon will be as a left picture and ready to use. 9. you can use “RFID Note” as usual now. (see 9.2.2 Start RFID Note) Note : 1.
6. Fine Port section and disable others Bluetooth devices which not use For example, there are 2 Bluetooth devices in your PC (COM3, COM4). And according to Bluetooth properties window, the device in concern is as COM4. So disable COM3 by 1. right click on "Bluetooth Communication port (COM3)" and 2. select "Disable". (see a picture below) Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
PR500 User manual Ref. Date: Rev. Mod. ELDV-DOC04/1 Rev.
PR500 User manual Released Ref. - (PR500 readers) Rev. 1_01 2008-03-13 Contents: 1. 2. Introduction ............................................................................................................................ 3 Preparing................................................................................................................................ 3 2.1 Environments ................................................................................................................ 3 2.
PR500 User manual Released Ref. - (PR500 readers) Rev. 1_01 2008-03-13 Revision Index Revision 1_00 Date 2007-11-07 Soemsak Author 1_01 2008-03-13 Soemsak Change Record New document - Added (4) FCC Statement AFG ASIA ENGINEERING CO.LTD. 65/12 M.10 T.Tonpao A.
PR500 User manual Released Ref. - (PR500 readers) Rev. 1_01 2008-03-13 1. Introduction This document specifies how to use the PR500 RFID reader, the reader user interface and the communication protocol with some modifications. 2. Preparing In this chapter specifies what tools and environments that you need for working with the PR500 RFID reader and also how to install driver and support software. 2.1 Environments • • • • 2.2 Tools (In Support CD) • • • 2.3 a PC (recommended >= Pentium 4, 1.
PR500 User manual Released Ref. - (PR500 readers) Rev. 1_01 2008-03-13 Picture 3.1.1 Layout of the keyboard And also user can turn ON the PR500 RFID reader by pressing the “Trigger” button on the reader. Picture 3.1.2 the “Trigger” button AFG ASIA ENGINEERING CO.LTD. 65/12 M.10 T.Tonpao A.
PR500 User manual Released Ref. - (PR500 readers) Rev. 1_01 2008-03-13 ***For saving power, the reader will turn OFF itself after 10 minutes if no pressed keys or no commands sent via virtual RS232 port. Picture 3.1.3 after the reader turn ON, it will go to the “MULTI READ ID(H)” mode 3.2 Reading IDs The PR500 RFID reader supports 2 standard types of the RFID transponders/tags, ISO18000/6B and ISO18000/6C (EPC Class1 Gen2). User can change reading tag type by pressing the “TAG TYPE” button.
PR500 User manual Released Ref. - (PR500 readers) Rev. 1_01 2008-03-13 If user is in the “MULTI READ ID(H)” mode, after user presses and hold the “Trigger” button, the PR500 RFID reader will read tags both ISO18000/6B and ISO18000/6C (EPC Class1 Gen2) and show 8 or 12 bytes IDs on the display such as below. Picture 3.2.2 the reading ID was shown in the display The counter number will increase according to the number of read tags. Note: the maximum tag number that the reader can count is 50 unique tags.
PR500 User manual Released Ref. - (PR500 readers) Rev. 1_01 2008-03-13 Download Software version1.0.0.0” (this document will explain it in the next chapter). The contents of the information are as below: Name Record number Date Time Tag type Action Display ID Start address Data length Data 3.3 Description The address in flash memory that the tag was stored. Date when the tag was read. Time when the tag was read.
PR500 User manual Released Ref. - (PR500 readers) Rev. 1_01 2008-03-13 Picture 3.3.1 the position of the “OPERATION” button Once user presses the “OPERATION” button, the operation will change to sequence below: “ISO-6B READ ID(H)” -> “ISO-6B WRITE DATA(H)” -> “ISO-6B READ DATA(H)” Picture 3.3.2 “ISO-6B WRITE DATA(H)” mode User can type in 1 – 32 bytes data from the keyboard on the PR500 RFID reader. Trip: if user wants to type in A,B,C in heximal, just repeat pressing the “2” button.
PR500 User manual Released Ref. - (PR500 readers) Rev. 1_01 2008-03-13 When user finishes typing in the data, point the reader to an ISO18000/6B tag ,press and hold the “Trigger” button to write the data into the tag until the display shows “PASS”. When it finishes writing the display will show “PASSED” and the buzzer will beep. Picture 3.3.3 writing success If user wants to write data in ASCII mode, just press the “DISPLAY” button. Picture 3.3.
PR500 User manual Released Ref. - (PR500 readers) 3.4 Rev. 1_01 2008-03-13 Reading other field of ISO18000/6B(EPC Class1 Gen2) The PR500 RFID reader allows user to read 4 fields in ISO18000/6B(EPC Class1 Gen2) tags. The fields are as below: • Reserve – the data such as “ACCESS CODE”, “KILL CODE”(read/write or read only). • EPC – EPC(ID) number of a tag (read/write/lock). • TID – tag’s manufacture number and/or serial number. This field is written from a factory (read only).
PR500 User manual Released Ref. - (PR500 readers) Rev. 1_01 2008-03-13 Picture 3.6.1 the position of the “LEFT” and “RIGHT” button. 3.7 Downloading data from flash memory After user was reading RFID tags, they will be able to download the data out of the flash memory by using program “PR500 Download Software version1.0.0.0”. the instruction below will show you how to download data. • Insert Support CD • Makes sure you have already install Microsoft Dot Net Framework 2.0.
PR500 User manual Released Ref. - (PR500 readers) Rev. 1_01 2008-03-13 Picture 3.6.1 layout of the program • • • Connect the PR500 RFID reader to the PC using the USB cable. Turn ON the reader. Go back to the program. Click “Discovers reader”. • • Picture 3.6.2 found readers The program will list the readers and show in the list box. Select the reader and then press “Connects to a reader” AFG ASIA ENGINEERING CO.LTD. 65/12 M.10 T.Tonpao A.
PR500 User manual Released Ref. - (PR500 readers) Rev. 1_01 2008-03-13 • User can download data by pressing “Downloads new records” or “Downloads all of records”. “Downloads new records” will continue downloading data from the last time but for “Downloads all of records” will download all of data that was stored in the memory. After you press “Download”, Save As dialog will show as below. • • Select the path for saving the data. Click “Save” User can select 2 extensions. First is .
PR500 User manual Released Ref. - (PR500 readers) 4. Rev. 1_01 2008-03-13 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.