ACR321 Ticket Validator For Automatic Fare Collection User Manual Version 1.00 Document Name: 03-USR-ACR321 info@acs.com.hk Subject to change without prior notice www.acs.com.
Table of Contents 1.0. Introduction ................................................................................................................. 3 2.0. Specifications .............................................................................................................. 4 3.0. Illustration .................................................................................................................... 5 3.1. 3.2. 3.3. 3.4. ACR321 device and parts .......................................
1.0. Introduction ACR321 – Ticket Validator is designed specifically for the use in Automatic Fare Collection (AFC) systems for public transport, e.g. for buses, ferries, trams, railway and other transportation means. ACR321 supports all smart cards/tags compliant to ISO14443 Type A & B, Mifare, and Near Field Communication (NFC) standard. By virtue of the embedded powerful 32bit ARM 11 processor, ACR321 enables a high speed transaction processing and transaction records collection.
2.0. Specifications • 32-Bit ARM11 Processor running embedded Linux • Flash 512 MB and RAM 256 MB • 5.
3.0. Illustration 3.1. ACR321 device and parts The main components on the front side of the ACR320 are shown below: Page 5 of 11 ACR321 - User Manual Document VersionTitle 1.00 Here Document Title Here info@acs.com.hk www.acs.com.
3.2. Battery A rechargeable Li-ion battery supplies energy to the device once the external power source cannot supply power to the device. So, transactions can still be processed even the power supply of the bus is out of order. The battery locates at back of the device. In order to change the battery, turn the screw in the circle in the figure below to left to remove the battery cover. Follow the direction of the red arrow to take away the cover.
3.3. SAM card slots There are 4 SAM card holders on ACR320. Each holder can contain 1 SAM card, so ACR320 has 4 SAM card slots in total. They are located behind the battery. In order to insert or change SAM cards, please follow some simple steps below. 1. Follow the instruction in chapter 3.2 to remove the battery cover 2. Unplug and remove the Li-ion battery and the SAM card slots will be seen Page 7 of 11 ACR321 - User Manual Document VersionTitle 1.00 Here Document Title Here info@acs.com.hk www.
3.4. Pin assignment GPIO is provided for reading status like door open/close and driving devices such as external buzzer or release a turnstile. Here is the pin assignment and some input/output circuit examples. Figure 1: 60-pin connector layout Page 8 of 11 ACR321 - User Manual Document VersionTitle 1.00 Here Document Title Here info@acs.com.hk www.acs.com.
Signal Signal Name Signal Description Signal Level 1 RS232/485 Port 1: 3.3V or open->RS232, 0V-> RS485 3.
31 Reserved (Don't connect) 32 Reserved (Don't connect) 33 Reserved (Don't connect) 34 Reserved (Don't connect) 35 V_EXTIN2 Isolated power-in for Input port 5-8 3V/5V 36 V_EXTIN2 Isolated power-in for Input port 5-8 3V/5V 37 G_EXTIN2 Isolated GND for Input port 5-8 Ground signal for input port 38 G_EXTIN2 Isolated GND for Input port 5-8 Ground signal for input port 39 V_EXTOUT2 Isolated power-in for Output port 5-8 3V/5V 40 V_EXTOUT2 Isolated power-in for Output port 5-8 3
Figure 2: Input circuit example Figure 3: Output controlling example - Lamp Figure 4: Output controlling example - Relay Page 11 of 11 ACR321 - User Manual Document VersionTitle 1.00 Here Document Title Here info@acs.com.hk www.acs.com.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.