ACR1281U-C Dual-Interface Reader User Manual info@acs.com.hk Subject to change without prior notice www.acs.com.
Version History Date By Changes Version 2011-05-09 Melissa Frances Balmes • Creation 0.00.00 2011-05-09 Winnie Chau • Adjust SAM speed to maximum 57600bps. 0.00.01 2011-05-18 Melissa Frances Balmes • Added product photo 0.00.02 2011-06-02 Melissa Frances Balmes • • • Updated information Changed photos Renamed product code to ACR1281U-C 0.00.03 2011-08-02 Melissa Frances Balmes • • • Changed product photo Revised Introduction Updated Technical Specifications 0.00.
Table of Contents 1.0. Introduction ............................................................................................................. 4 2.0. Features ................................................................................................................... 5 3.0. Typical Applications................................................................................................ 6 4.0. How to use?.....................................................................................
1.0. Introduction The ACR1281U-C DualBoost II is the second generation of ACS’ ACR128 DualBoost Reader. ACR1281U-C is a dual interface reader that can access any contact and contactless smart cards following the ISO 7816 and ISO 14443 standards. This reader makes it possible to integrate into one device and one card the conventional separate and independent applications for contact and contactless technologies. Like ACR128, DualBoost II is PC/SC compliant for both contact and contactless interfaces.
2.0.
3.0. Typical Applications • • • • • • • e-Government e-Banking and e-Payment e-Healthcare Transportation Network Security Access Control Loyalty Program FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
4.0. How to use? 4.1. Install ACS CCID Driver Step 1: Double click the “Setup.exe” from the installer “ACR1281_PCSC_Driver_Installer_bin-1.0.1.0-20110818_all”. Step 2: The driver will automatically install for ACR1281-C. 4.2. Read the card UID Step 1: Connect the reader to the computer Step 2: Execute the “APDU.exe” Step 3: Put the card onto the reader. Step 4: Set the program according to the picture below Step 5: Click Connect. Step 6: Click Transmit.
5.0. Technical Specifications Universal Serial Bus Interface Power source ....................................... From USB Speed................................................... 12 Mbps (Full Speed) Supply Voltage ..................................... Regulated 5V DC Supply Current ..................................... < ,,200 mA Contactless Smart Card Interface Standard............................................... ISO 14443 A & B Parts 1-4 Protocol ................................................