Installation Instructions for Budget Sink No Splash Drainboards

Installation Instructions for

Budget Sink

No-Splash Drainboards

CHECK FOR CONCEALED DAMAGE

FILE CLAIM WITH DELIVERING FREIGHT CARRIER

No Splash Drainboards manufactured by ADVANCE TABCO are designed to facilitate

drainage of utensils and wares after rinsing. ADVANCE TABCO does not recommend

drainboard surfaces be used for food preparation. Do not use bleach or harsh chemicals

when cleaning. Consult factory regarding unusual applications.

36” and 48” No-Splash Drainboards

Edgewood, New York 11717-8380

Step 4:

Position Angle Bracket onto (3) Stud Welds (Illustration 4a) and install 3

Nyloc hex Nuts onto Stud Welds (Illustration 4b) -

DO NOT TIGHTEN.

Position No-Splash Drainboard tight against sink side. Slide Angle Bracket

tight against outer sink side and tighten Nyloc Nuts.

Step 2:

Position No-Splash Drainboard

onto desired side of sink

And follow Step 4 Above.

Step 3:

Adjust bullet foot at bottom of leg to ensure positive drainage.

Illustration 4a

Illustration 5

Illustration 4b

Step 1:

Install 2 Galvanized Legs into leg gussets at end of No-Splash Drainboard.

Tighten using Set screws provided (Illustration 5).

PAGE 1
Step 4: Position Angle Bracket onto (3) Stud Welds (Illustration 4a) and install 3 Nyloc hex Nuts onto Stud Welds (Illustration 4b) - DO NOT TIGHTEN. Position No-Splash Drainboard tight against sink side. Slide Angle Bracket tight against outer sink side and tighten Nyloc Nuts. Installation Instructions for Budget Sink No-Splash Drainboards Illustration 4a Illustration 4b 36” and 48” No-Splash Drainboards Step 1: Install 2 Galvanized Legs into leg gussets at end of No-Splash Drainboard.
PAGE 2
18”-24” and 30” No-Splash Drainboards Contents: (1) No-Splash Drainboard (2) Drainboard Support Braces or (2) Galvanized Legs with Adjustable Plastic Bullet Feet (36” & 48” Units only) (1) Angle Bracket (2) 5/16” - 24 x 1/2” Socket Set Screws (2) 1/4” - 20 x 3/8” Slotted Truss Screws (2) 1/4” - 20 Hex Nuts (2) 5/16” - 24 Hex Nuts (3) 10 -24 Nyloc Hex Nuts Step 3: A) Position No-Splash Drainboard onto Budget Sink (Illustration 3a).