Equipment Stands Spec Sheet
Item #: Qty #:
Model #:
Project #:
29 lbs.
32 lbs.
47 lbs.
54 lbs.
62 lbs.
78 lbs.
84 lbs.
110 lbs.
--
--
43 lbs.
--
50 lbs.
68 lbs.
80 lbs.
96 lbs.
15”
18”
24”
30”
36”
48”
60”
72”
--
--
EG-LG-242-X
--
EG-LG-243-X
EG-LG-244-X
EG-LG-245-X
EG-LG-246-X
EG-LG-3015-X
EG-LG-3018-X
EG-LG-302-X
EG-LG-300-X
EG-LG-303-X
EG-LG-304-X
EG-LG-305-X
EG-LG-306-X
STAINLESS STEEL
ECONOMY EQUIPMENT STANDS
O-12
NEW YORK GEORGIA TEXAS NEVADA
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
FEATURES:
TOP is furnished with 1” hemmed edge splash on rear and both sides.
Undershelf is adjustable.
Aluminum die cast “leg to shelf” clamp secures shelf to leg
eliminating unsightly nuts and bolts.
CONSTRUCTION:
All TIG welded. Exposed weld areas finished to match adjacent surfaces.
Entire Top is mechanically polished to a satin finish and is sound
deadened.
Galvanized hat channels are secured to top by means of structural
adhesive and weld studs.
Gussets welded to support hat sections.
MATERIAL:
TOP is 18 gauge stainless steel type “430” series with galvanized
understructure.
SHELF is galvanized steel.
LEGS are 1 5/8” diameter galvanized steel with plastic bullet feet.
Featuring as Standard:
“THE PROVEN”
ORIGINAL ADVANCE TABCO
Adjustable Undershelf
with Die Cast Leg Clamp
Optional X.H.D. Casters
TA-25EG-X Set of 4
Each Set Supplied w/ 2 Brakes.
(225 lbs. Load Capacity Per Caster)
L 24” Wide Wt. 30” Wide Wt.
NOTE: “L” = Clear (inside nominal) dimension
Overall length = “L” + 1/4”