Perimeter Plus Vehicle Security and Remote Start Systems Owner’s Manual 4280760 Rev P6 04/17 4280760 Phase 2 VSS_RMST Owners Guide_P6.
Contents Welcome ............................................................................................3 Perimeter Plus Vehicle Security (optional) ....................................4 Arming the Security System .................................................................... 4 Disarming the Security System ............................................................... 4 When the Security System is Armed ....................................................... 5 Security LED Indicator (optional).
Welcome Congratulations on your purchase of a Ford Motor Company Perimeter Plus Vehicle Security and/or Remote Start System. This technology represents the latest in automotive convenience and protection systems. Your system, purchased today, is ready to accept tomorrow’s advancements in technology. The Ford Motor Company vehicle security and remote start system is a scalable product that can be configured based on personal preference and vehicle model.
Perimeter Plus Vehicle Security (optional) NOTE: Using your factory supplied Remote Keyless Entry (RKE) keyfob is the primary method of arming and disarming your Perimeter Plus security system. The system is armed when the doors are locked with the RKE keyfob. The system is disarmed when the doors are unlocked with the RKE keyfob. Arming the Security System: The Vehicle Security System may be armed using any of the methods below. 1. By pressing the (Lock Button) on the factory RKE keyfob. 2.
Perimeter Plus Vehicle Security (optional) When the Security System is Armed: •All interior entry points are monitored for unauthorized entry (Note: depending on trim level, the vehicle’s hood or trunk / liftgate may not be monitored); •The shock sensor (optional) monitors for impact to the vehicle’s body or glass; •The security LED indicator (optional) flashes once every few seconds. If any monitored entry point is opened or hard impact is detected, the system will activate an alarm cycle.
Perimeter Plus Vehicle Security (optional) Shock Sensor Disable: The security system has the ability to ignore the optional shock sensor while armed. This feature is useful for events that may jar your vehicle, but pose no threat, such as a loud thunder storm or heavy construction traffic passing near your parked vehicle. This feature may be activated using the procedure listed below. The vehicle’s doors can be opened or closed during this process. To Disable the Shock Sensor: 1.
Basic Remote Start Feature (optional) Remote Keyless Entry Transmitter To Activate Remote Start: To Shutdown Remote Start: 1. Press 1. Press 2. Press within 3 seconds 2. Press within 3 seconds 3. Press within 3 seconds 3. Press within 3 seconds Transmitter image for reference only. Actual transmitter design may vary.
Long-Range 1-Way and 2-Way Remote Start System (optional) 1-Way Transmitter 2-Way Transmitter Press two times to activate Remote Start. Press and hold** to manually shut down the Remote Start. Press to initiate Car Find. Press and hold** to initiate Panic Starting Your Vehicle with the 1-Way Transmitter: The remote start function is activated by pressing the button two times* within 3 seconds on the 1-way remote control transmitter.
Long-Range 1-Way and 2-Way Remote Start System (optional) 2-Way Transmitter Feedback Indicators: Transmitter Indicators Remote Start Status 1 Beep/LED Flash Vehicle has received an Initiate Start Command. 2 Beeps/LED Flashes Vehicle has started. Steady LED Flash Vehicle is running. 3 Beeps/LED Flashes Vehicle has shut down, either by pressing and holding** the button or completing the run cycle (Transmitter must be in range of the vehicle).
Remote Start Operation (optional) Entering the Vehicle While it is Running via Remote Start: 1. 2. 3. Enter the vehicle with the Integrated Keyhead transmitter. Insert the key into the ignition and turn to the ON position. Once a programmed vehicle key has been recognized, the remote start session will stop and the vehicle will operate normally.
Remote Start System Maintenance Changing the Remote Control Transmitter Battery (Long-Range 1-Way and 2-Way Remote Start System): The (CR-2032 for 1-way transmitter and CR-2450 for 2-way transmitter) 3-volt lithium battery supplied in your remote control should last approximately one year, depending on usage. When the battery begins to weaken, you will notice a decrease in remote transmitter operational range (the distance from your vehicle).
User Selectable Remote Start Options Optional Activation Method (Long Range 1-Way & 2-Way Remote Start Systems): The Remote Start System comes pre-programmed to start the vehicle when the button on the remote control transmitter is pressed 2 times. The Remote Start System may be programmed instead to activate by pressing and holding** the button on the remote control transmitter for more than 2.5 seconds by following these instructions. 1. 2. 3. 4.
FORD VEHICLE REMOTE START SYSTEMS LIMITED WARRANTY BASIC COVERAGE Ford Motor Company will repair or replace any properly installed Ford Vehicle Security/Remote Start/Keyless Entry System found defective in factory-supplied material or workmanship during the warranty period, as well as any component damage by the defective accessory.
