PROFESSIONAL SERIES Owner’s Guide For Model: CA 1055 Vehicle Security and Keyless Entry System IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information. 2017 Voxx Electronics Corporation. All rights reserved.
Table of Contents Using Your Remote Control..................................................................... 3 Arming the Security System............................................................... 3 Passive Arming Bypass...................................................................... 3 Bypassing the Shock Sensor............................................................. 3 Hidden Alarm Function.......................................................................
Using Your Remote Control Arming the Security System To arm the system, exit the vehicle, close all doors, then press the button. The parking lights will flash 2 times, indicating the system is armed, has locked the doors (if equipped and connected) and activated the starter disable feature. The LED status indicator will blink steadily, once per second. NOTE: The system is equipped with a feature called Silent Choice.
Activating the Trunk Release Feature (Optional) If this feature is enabled on your system, pressing and holding the seconds will open the vehicle’s trunk or hatch. button for 3 Using the Progressive Car Finder Feature Press the button to locate your vehicle. The system will flash the parking lights and sound 5 times at low volume, increasing in volume each time the button is pressed.
User Selectable LED This feature will control whether the LED is ON or OFF when the system is Armed/ Locked and can be toggled ON or OFF without entering the programming feature banks. 1. 2. Turn the ignition ON, OFF, ON, OFF. Press and release the valet/programming button 3 times. The system will respond with 1 chirp for ON or 2 chirps for OFF. Manually Overriding the Security System Your system can be disarmed without the use of the transmitter.
Status LED, Light Flashes, and Siren/Horn Indications Status LED Flash Indications LED Flashes Function OFF Disarmed Slow Flash Armed Fast Flash Passive Arming Countdown ON (Solid) Valet Mode 2 Flashes Zone 2 Trigger, Hood / Trunk 3 Flashes Zone 3 Trigger, Door 4 Flashes Zone 4 Trigger, Shock Sensor 5 Flashes Zone 5 Trigger, Ignition Siren/Horn Chirp Indications Chirps 1 Function Disarm 2 A
Remote Control Buttons & Functions Lock Lock Unlock Trunk Car Find / Operation Method Panic X Unlock Press and Release X Trunk Press and Release X Push and Hold (3 Sec) Car Finder X Press and Release Panic X Push and Hold (3 Sec) X Press and Release Lock then Press Lock + Car Find (within 5 Sec) Shock Bypass X Passive Arming Bypass Arm with Hidden Alarm Function X X Press 2 Times (within 5 Sec) X Press Trunk then Lock (within 5 Sec) Replacing Remote Control Batteries 4-Button Remot
ca1055 Owners revA
LIMITED LIFETIME WARRANTY Applies to Code Alarm Series Control Modules, Sirens, Sensors, and Relays.
ca1055 Owners revA
2017 Voxx Electronics Corporation. All rights reserved.
Voxx Electronics Corporation. Customer Service 1-800-421-3209 WWW.CODE-ALARM.COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including any interference that may cause undesired operation.