PROPLM Owner's Manual Remote Vehicle Security and Keyless Entry System IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information. 2009 Audiovox Electronics Corporation. All rights reserved.
Table of Contents Table of Contents Features and Benefits ......................................................................... 3 Using Your Remote Control ............................................................... 4 Arming the system ........................................................................... 4 Disarming the system ....................................................................... 4 Two stage unlock .............................................................................
Features and Benefits Two Easy-to-Use Weather-Resistant Remote Controls The remote controls included the PROPLM Security System utilize durable, moisture resistant cases and sealed rubber buttons for reliability and long life. Rolling code technology prevents the transmitter signals from being duplicated. The button functions are clearly labeled to make the system easy to operate.
IMPORTANT NOTE: The operation of the PROPLM Security System as described in this manual is applicable to most vehicles. However, due to the engine type and configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information. * If vehicle is equipped with power door locks and they are connected to the alarm system by your installer. ** May require additional connections, components, and/or charges. See your installer for details.
Using the Progressive Car Finder Feature Press the CAR FIND/PANIC button on the remote control to locate your vehicle. The system will sound 5 times at low volume increasing in volume each of 3 times the button is pressed. Using the Personal Protection Alarm (Panic) Press and hold the CAR FIND/PANIC button on the remote control for 2 seconds to activate the personal protection alarm. The system will sound for 30 seconds. Pressing any button on the remote control will turn the personal protection alarm off.
Automatic Convenience Options The PROPLM Security System performs a variety of automatic functions to enhance security and comfort. Some of these features are programmable at the time of installation. Please see the installing dealer for details. Automatic Arming The PROPLM Security System will arm automatically 1 minute after the ignition is turned off. This feature can be temporarily disabled by placing the system into Valet mode.
Number of flashes: 1 - Interior Theft Sensor (Shock Sensor) 2 - Door Input 3 - Hood Input 4 - Trunk Input 5 - Ignition Emergency Disarm Procedure If your remote control is lost or fails to function, use this procedure to disarm the security system and start your vehicle. 1. 2. 3. Use the keys to enter the vehicle. The alarm will sound once the door is opened. Insert the key into the ignition and turn to the ON position. Press the valet button.
Adding Remote Controls to Your System The PROPLM Security System has the ability to operate from up to 4 remote controls. Follow these steps to add a remote control to your system. 1. Make sure the system is disarmed and the ignition is off. 2. Turn the ignition on. 3. Press and release the override button 3 times the system will chirp 1 time indicating the system has entered programming mode. 4. Press the LOCK button on the remote to be programmed.
Basic Trouble Shooting Symptom Problem Solution Remote does not work: Weak or dead battery. Change battery. System will not arm: Door or entrance is open. Close entrance. Courtesy light is on. Turn courtesy light off. System is in Valet mode. Exit Valet mode. 2009 Audiovox Electronics Corporation. All rights reserved.
60 MONTH LIMITED WARRANTY Applies to Pursuit Series Control Modules, Sirens, Sensors, and Relays.
The company does not warrant that this product cannot be compromised or circumvented. THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT WITHOUT INSTALLATION LABOR.
FCC COMPLIANCE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including any interference that may cause undesired operation. Warning! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 12 2009 Audiovox Electronics Corporation. All rights reserved.