Face Recognition Scanner V200721 User's manual Please read this manual before switching the unit on. Important safety information inside.
Face Recognition Scanner user's manual Contents Page 1. Product Appearance.................................................................... 3 2. Interface Instruction.................................................................... 4 3. Wiring Instruction........................................................................ 5 4. Technical Specifications.............................................................. 6 5. Access Control & Attendance for Company............................ 7 6.
Face Recognition Scanner user's manual The Face Recognition Scanner supports 3 usage modes, and is equipped with different platform software for more powerful functions. 1. Access Control & Attendance for Company | Equipped with Attendance & Access Control Management Platform Software for Company. 2. Access Control & Attendance for School | Equipped with Attendance & Access Control Management Platform for School. 3. Quick Screening | Used for quick temperature screening.
Face Recognition Scanner user's manual Face Recognition Scanner user's manual 3. 7PIN 12V Power Supply, Relay Interface Microphone 1 COM 2 NO 3 NC 4 GND 5 GND 6 12V 7 12V 4. Ethernet port 5. 2PIN 485 Interface Reset Button Speaker 1 485A 2 485B 6. Tamper key 7. Micro USB Port 8. USB-A Port 9. 12V Power Adapter Socket Screw holes for hanging board 3. Wiring Instruction 2. Interface Instruction 5 1 6 2 7 3 8 4 9 1.
Face Recognition Scanner user's manual 4. Technical Specifications Temperature measurement module parameters Face Recognition Scanner user's manual Smart functions Face recognition capacity 50000 Measuring range 32oC~45oC/ 89.6oF~113oF Offline record 100000 Measurement accuracy ±0.5oC/ ±0.9oF (at 25±2oC/ 77±3.6oF ambient temperature) Recongition accuracy 99.83% Measuring diatance 20~50cm Face liveness detection Support binocular near infrared live detection Measure time 0.
Face Recognition Scanner user's manual Face Recognition Scanner user's manual 6. Access Control & Attendance for School 9. Install Instruction At this mode, User need to login to the Attendance & Access Control Management Platform Software for School to add the device ID, import students and teachers’ information and their face photos and configure this device as an attendance device for them. After the configuration is complete, the user can use the device to synchronize data.
Face Recognition Scanner user's manual Face Recognition Scanner user's manual Wall-Mounted Installation 1. Attach an installation sticker to the wall, make holes in the wall according to the height and position of the sticker, insert a wall plug, and install 4 hex screws. 2. Fix the hanging board on the wall with four KM 4* 10 screws. 3. Hook the device from top to bottom on the hanging board, and make sure that the upper part of the hanging board is inserted into the groove on the back of the device. 4.
Face Recognition Scanner user's manual FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
IC STATEMENT This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.