User Manual

ManualsBrandsADV ManualsElectronics500

1：Micro charging input

2：LED light for charging compartment

3：charging probe

4：Microphone indicator

5：Multifunctional touch key

6：speaker

充电模式 charging mode

请于首次使用前将耳机连同充电盒一起充满电。

Please fully charge the headset together with the charging case

before using it for the first time.

启动蓝牙 activate bluetooth

1、打开充电仓上盖,将耳机从充电仓拿出,或者触摸 L 或 R 耳机 3

秒后，耳机蓝灯闪烁 3 次即耳机开机，提示音:“ 嘟嘟嘟” 升调；

1、1. Open the top cover of the charging box, take the earphone

out of the charging box, or touch the L or R earphone for 3

seconds, the blue light of the earphone flashes 3 times, the

earphone is turned on, and the prompt tone: "beep beep" rises;

Summary of content (8 pages)

PAGE 1
：Micro charging input 2：LED light for charging compartment 3：charging probe 4：Microphone indicator 5：Multifunctional touch key 6：speaker 充电模式 charging mode 请于首次使用前将耳机连同充电盒一起充满电。 Please fully charge the headset together with the charging case before using it for the first time. 启动蓝牙 activate bluetooth 1、打开充电仓上盖,将耳机从充电仓拿出,或者触摸 L 或 R 耳机 3 秒后，耳机蓝灯闪烁 3 次即耳机开机，提示音:“ 嘟嘟嘟” 升调； 1、1.
PAGE 2
、主机蓝灯交替闪烁，副耳蓝灯隔 3 秒闪烁一即耳机待配对状态。 2、The blue light of the main unit flashes alternately, and the blue light of the auxiliary ear flashes every 3 seconds, that is, the earphone is ready to be paired. 3、开启手机蓝牙，搜索蓝牙设备“ Q 3 ” ；点击连接，连接成功后，即可使用耳机听歌通话。备注：首次连接该耳机需要手动连，非首次连接耳机会自动回连过的设备。即耳机开机后，若附近有已配对过的设备则回连。（苹果安卓手机连接方式一致） 3、3.
PAGE 3
电仓内自动关机。 ①Power on/off: Open the top cover of the charging compartment and take out the earphones to automatically turn on, and put the earphones back into the charging compartment to automatically shut down. ②开机：长按耳机的多功能键 3 秒手动开机。 ②Power on: Press and hold the multi-function button of the headset for 3 seconds to manually power on. ③关机：长按耳机的多功能键 5 秒手动关机。 ③ Shutdown: Press and hold the multi-function button of the headset for 5 seconds to manually shut down.
PAGE 4
One of the following functions can be obtained using the multifunction button: 待机状态,单击任何一边耳机的触控区域,播放、暂停音乐 In standby mode, click on the touch area of any earphone to play and pause music 上一曲／下一曲：Previous/Next: 播放音乐时,双击触摸左边耳机进入上一曲, When playing music, double click and touch the left earphone to enter the previous song, 双击触摸右边耳机进入下一曲 Double-click to touch the right earphone to enter the next song 音量＋:默认音量 Volume +: Default volume 音量－:默认音量 Volume -: Default volume 接听来电/结束通话：To answer/end a call: 手机来电时,单击任何一边耳
PAGE 5
接来电 When the phone calls, press and hold the touch area of any earphone for 2 seconds (the finger does not need to leave) to reject the call 语音助手 siri 唤醒语音：长按任何一边耳机的多功能键 2 秒， “ 滴” 提示音后松手唤醒语音助手 Wake-up voice: long press the multi-function button of any earphone for 2 seconds, let go after the beep beep to wake up the voice assistant 恢复出厂设置 reset 开机状态下，分别五击左耳和右耳的多功能键，随后两只耳机会自动关机，此时将耳机放入充电仓，10 秒后拿出重新搜索配对 In the power-on state, press the multi-function button of the left ear and the right ear respectively
PAGE 6
产品参数：Product Parameters: 产品型号 Product type 500 蓝牙版本 Bluetooth version V5.2 蓝牙名 bluetooth 500 频率 frequency 2.4GHz 蓝牙传输距离 Bluetooth ＞12M transfer distance 耳机电池容量 battery capacity 30mAh*2 充电仓电池容量 battery 180mAh capacity 输入 Input DC5V/1A 播放时长 Play time About 5 H 防水等级 waterproof level IXP4 安全事项：Safety matters: 请勿挤压或碰撞，避免跌落。 Do not squeeze or bump, avoid falling 请使用原装或认证的充电线。 Please use an original or certified charging cable.
PAGE 7
请保持耳机干燥，切勿丢入水中。 Please keep the earphone dry and do not drop it in water 远离儿童，以避免有可能伤害儿童的意外情况。 Keep away from children to avoid unexpected situations that could harm children. 请勿在雷电天气使用耳机以免发生意外情况。 Do not use the headset in lightning weather to avoid accidents. 请使用软布擦拭，避免使用刺激性化学强力洗涤剂清洗。 Please wipe with a soft cloth and avoid harsh chemical strong detergents. 请勿在严重高温/潮湿/腐蚀性环境下使用本产品。 Do not use this product in severe high temperature/humidity/corrosive environments.
PAGE 8
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.