Installation Instructions

ManualsBrandsAdtran ManualsElectronics4x4 AX Dual-band AP

Table Of Contents

uick Star

Overview

This quick start describes how to install and access ADTRAN’s Bluesocket 6040 access point (BSAP), a WiFi-6 (802.11ax) 4x4 indoor AP designed to provide

enterprise-grade performance within high-density wireless environments. This robust AP simultaneously supports four transmit and four receive streams with data

rates up to 3.5 Gbps (2.4 Gbps for 5 GHz and 1.1 Gbps for 2.4 GHz) using four internal MU-MIMO antennas with up to 5 dBi peak gain, and supports zero-touch

provisioning using ADTRAN’s virtual wireless local area network (vWLAN) cloud-management application. The BSAP 6040 is fully functional with 802.3at Power over

Ethernet (PoE+), support for Bluetooth 5.0/LE radios for Beacons or Internet of Things (IoT) applications, WPA3 encryption and Wireless Intrusion Detection (W-IDS)

for added security, support for the traditional DynamicRF, Neighbor Discovery, Layer 7 device fingerprinting features and the new multi-user MIMO (MU-MIMO),

orthogonal frequency-division multiple access (OFDMA), basic service set (BSS) coloring, advanced 1024-QAM, and target wake time (TWT) features for WiFi 6.

■ “Installing the BSAP 6040”

on page 2

■ “Supplying Power to the BSAP 6040” on page 5

■ “Connecting to the BSAP 6040” on page 5

■ “Managing the BSAP 6040” on page 5

■ “BSAP 6040 LED Descriptions” on page 7

■ “Product Specifications” on page 8

Figure 1. BSAP 6040

WARNING!

Read all warning, cautions, notes and installation instructions before installing or servicing this equipments.

LEDs

Reset

Button

USB 2.0

12 VDC

Power Input

Kensington

Lock

Keyed Mounting

Slots

1Gb

2.5Gb

(PoE+ In)

f WARNING!

f CAUTION!

g NOTE

WARNING indicates a hazard which, if not

avoided, could result in death, injury or

serious property damage.

CAUTION indicates a hazard which, if not

avoided, could result in service interruption,

damage to the equipment, or minor property

damage.

NOTES inform the user of additional, but

important, information or features.

ADTRAN

BSAP 6040

4x4 AX Dual-band AP

April 2022

61700972F1-13C

P/N: 1700972F1

Summary of content (9 pages)

PAGE 1
ADTRAN April 2022 61700972F1-13C BSAP 6040 Quick Start 4x4 AX Dual-band AP P/N: 1700972F1 Overview f WARNING! Read all warning, cautions, notes and installation instructions before installing or servicing this equipments. This quick start describes how to install and access ADTRAN’s Bluesocket 6040 access point (BSAP), a WiFi-6 (802.11ax) 4x4 indoor AP designed to provide enterprise-grade performance within high-density wireless environments.
PAGE 2
Installing the BSAP 6040 g NOTE Refer to the national, state and local electrical codes for the requirements for power, grounding, wiring, and installation methods.
PAGE 3
T-Rail T-Rail Mount Bracket Figure 3. BSAP Ceiling Mount Brackets 2. Once the mounting bracket is attached to the BSAP, align the mounting bracket at a slight angle to the T-rail. Slide the long bracket tabs onto the T-rail and rotate slightly until the flexible bracket tabs snap into place. Figure 4. BSAP Dropped Ceiling Mount 3. Optionally protect your PNS with a Kensington cable lock (not provided) inserted in the security slot.
PAGE 4
Hose Strap Insertion Figure 6. Attach the Pole Mounting Bracket for Vertical Mounting 2. Wrap the hose strap around the vertical mounting pole and insert the end into the strap lock. Tighten the strap lock to secure the unit to the pole as shown in Figure 7. Vertical Pole Mount Figure 7. Vertical Pole Mounting of BSAP Mounting the BSAP 6040 to a Horizontal Pole 1.
PAGE 5
Mounting the BSAP 6040 to a Junction Box The BSAP 6040 can also be mounted to a junction box using the ADTRAN junction box mounting kit. This kit is sold separately and not included with the base product shipment (PN 1700978F1 - Junction Box Mount Kit for BSAP 6040/6020). Refer to the instructions included with the junction box mounting kit for installation. The junction box mounting kit includes the bracket, two #6 (32 x 3/4 inch) screws, and two #8 (32 x 3/4 inch) screws.
PAGE 6
For existing Express Cloud accounts adding additional BSAPs: 1. Go to https://adtran.com/cloud. 2. Using the same email address as the existing Express Cloud account in the email field and the domain name in the company field. 3. If using an email address that already has an account and a domain that already exists, you will be adding additional BSAPs to that existing account and domain. 4. Confirmation that BSAPs have been added will be sent via email within one business day. 5.
PAGE 7
Configuring the Application More detailed information about configuring the BSAP 6040, refer to the vWLAN Administrator’s Guide, available online at https://supportcommunity.adtran.com. Additional safety and regulatory guidelines are also available in the Bluesocket Compliance Notice available online at https:// supportcommunity.adtran.com.
PAGE 8
LED Array BSAP State 1 Solid Flashing 2 2.4 GHz 5 GHz Flashing 2.4G LED only Flashing 5G LED only Off Operational with Activity on Radios Flashing 5G LED only (scanning radio active) Product Specifications Electrical ■ Input: 802.
PAGE 9
FCC Statements ■ This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: ■ ■ 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. ■ This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 25 cm between the radiator and your body.