User's Manual

ManualsBrandsAdtran ManualsElectronicsWireless Mini PCI

jobAid

DESCRIPTION

The ADTRAN 2 POTS/4GigE with 2.4+5.0 Gig WiFi is an Optical Network Unit (424RG

ONU) that converts signals being transmitted on optical fiber into electrical signals at a

customer location. The illustration at the left displays the front and rear of the 424RG ONU.

FEATURES

The 424RG ONU supports the following features:

■ Two POTS (PHONE) Ports

■ Four Ethernet Ports

■ 2.4 GHz and 5.0 GHz WiFi

■ 12 VDC Power Adapter

■ USB Port

■ UPS Connector

■ Reset Button

Resetting the ONT

WARNING

All settings will return to Factory Defaults; registration provisioning will be lost.

A reset button is available if the 424RG ONU needs to be rebooted. The Reset button is

located just below the

USB port on the rear of the 424RG ONU. To reset the 424RG ONU,

press the RESET button for 5 seconds or longer.

Voice Processing

POTS uses in-band signaling tones and currents to determine call status (for example, call request). Because POTS allows for the transfer of

audio signals below 3.3 kHz, POTS systems are also used for modems that allow data transmission (referred to as dial up connections).

Ethernet Interface

The 424RG ONU supports data service through four 10/100/1000Base-T Ethernet interfaces via RJ-45 connectors.

Power

Power is provided by a 12 VDC Power Adapter that is included with the 424RG ONU. The Power Adapter operates from a main power source

input of 100 to 240 VAC, 50/60 Hz, with a nominal output of 12 VDC. The total power consumption with WiFi enabled, 4 Ethernet Ports running

and both POTS lines off-hook is approximately 22.0 Watts. A connection for an optional un-interruptible power supply (UPS) is also provided.

UPS

The 424RG ONU provides an optional connection for an UPS. An UPS is a battery backup system designed to continue providing power when

the primary power source is lost. Power is supplied to the 424RG ONU by a local power source with battery backup that utilizes the AC power

at the customer premises and keeps the battery charged.

CLEI: BVMFG00A_ _

Product P/N: 1287781F2

Issue Date: July 2016

Document P/N: 61287781F2-22A

Documentation for ADTRAN

Carrier Networks products is available

for viewing and download directly from the ADTRAN Support

Community website.

Go to: https://supportforums.adtran.com/welcome

Registration is required.

ADTRAN offers training courses on our products, including customized

training and courses taught at our facilities or at customer sites.

For inquiries, go to: http://adtran.com/training

The following related online documents and resources provide additional information for this

product:

Total Access 5000 GPON OLT User Interface Guide

Total Access 5000 Series CLI Dictionary

Total Access 5000/5006 Engineering Guide

Total Access 5000 Series Fiber to the Premises Deployment Guide

ADTRAN 400 Series Residential Gateway ONT Basic Configuration Guide

ADTRAN 424RG

2 POTS/4GigE with 2.4+5.0 Gig WiFi

Optical Network Unit

WPS

RESET

USB

GE 4GE 3GE 2GE 1

PHONE 1PHONE 2

UPS12V

2.4

5.0

Front Rear

Summary of content (4 pages)

PAGE 1
jobAid ADTRAN 424RG CLEI: BVMFG00A_ _ Product P/N: 1287781F2 2 POTS/4GigE with 2.4+5.0 Gig WiFi Optical Network Unit Issue Date: July 2016 Document P/N: 61287781F2-22A The following related online documents and resources provide additional information for this product: Documentation for ADTRAN® Carrier Networks products is available for viewing and download directly from the ADTRAN Support Community website. Go to: https://supportforums.adtran.com/welcome Registration is required.
PAGE 2
WiFi Installation Steps The WPS or “Wi-Fi Protected Setup” function allows you to connect wireless devices without entering the password in the device. This is enabled by simultaneously pressing the button on the left-side of the 424RG ONU and the WPS button on the device which it is going to link to for 5 seconds. The 424RG ONU must sit upright using the stand provided. DO NOT lay the ONT flat as it may overheat. The 424RG ONU WiFi 802.11b/g /n/ac supports both 2.4 GHz and 5 GHz.
PAGE 3
Step 2: Connect POTS (PHONE) If POTS cables are not available, use Figure 3 and the following procedure to create the POTS cables: 1. Trim the insulation for the subscriber POTS cables. 2. Refer to the illustration below and connect the twisted-pair Tip (green) and Ring (Red) to the RJ-11 connector using an RJ-11 crimper. 3. Insert the RJ-11 connector in the appropriate PHONE 1 or PHONE 2 jack. 1234 The 424RG ONU can typically use an un-interruptible power supply (UPS) if desired.
PAGE 4
LED STATUS REGISTRATION ID The LEDs are located beneath the plastic housing and are only visible after power has been applied. The following table provides the LED status during normal operations. Registration ID is performed by Serial Number Activation. This occurs when the 424RG ONU is “Discovered” by the OLT. Label If AOE Auto Upgrade is active, a new 424RG ONU installation will be detected and a fast blinking FIBER LED will indicate a new software download has commenced.