User's Manual

ManualsBrandsAdtran ManualsElectronicsWireless Mini PCI

WirelessCardInstallationGuide

Cardname:XW325EH2.4GRadioDaughtercard

Model/PN:33500008x‐E(x=0~9,a~z,A~Z,blank,“‐”or“+”)

Description:

 802.11b/g /nsupporton2.4GHzradiowith2x2MIMOantennadesign

 The2.4GHzradioSHALLsupportthefrequencybandspecifiedin802.11b/g/n.

 The2.4GHzradioSHALLincorporatea2x2MIMOantennaarrangementwith2

spatialstreams

 The2.4GHzradioSHALLsupport20and40MHzchannelsonthe2.4GHzradio



1.Installationwa y

Step1:Findtheboardandmakesurethequality



Step2:AssembleXW325EGintheminiPCIesocket.



Summary of content (6 pages)

PAGE 1
Wireless Card Installation Guide Card name: XW325EH 2.4G Radio Daughter card Model/PN: 33500008x‐E (x=0~9, a~z, A~Z, blank, “‐” or “+”) Description:  802.11 b/g/n support on 2.4GHz radio with 2x2 MIMO antenna design  The 2.4 GHz radio SHALL support the frequency band specified in 802.11b/g/n.  The 2.4GHz radio SHALL incorporate a 2x2 MIMO antenna arrangement with 2 spatial streams  The 2.4GHz radio SHALL support 20 and 40 MHz channels on the 2.4 GHz radio 1.
PAGE 2
Step3: Assemble with necessary screws. 2pcs per unit.
PAGE 3
Step6: Log in the unit to setup the configuration, IP: 192.168.1.
PAGE 4
2. Safety and Regulatory Compliance Notice Module FCC ID： HDC414RG24X Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 5
manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than the palm of the hand, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 6
RSS-GEN 8.4 Notice for Canada Module IC ID： 2250A-414RG24X This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.