Indoor Camera Quick Start Guide
Welcome to Blue by ADT You’ve made a great decision to help protect your family and home with the purchase of your Blue by ADT Indoor Camera. Use your Blue Indoor Camera to watch and record activities in your home. This WiFi-enabled security camera can be set up with custom motion detection to record videos or take photos.
Setting Up Your Blue by ADT Indoor Camera Getting started is simple. Just follow these steps: 1. P lug your Blue by ADT Indoor Camera into an outlet. 2. Download the iOS or Android app by visiting www.BluebyADT.com/apps 3. Open the app to create an account or log in to an existing account. 4. Go to Settings > Devices > Add Device and select your Blue Indoor Camera. 5. F ollow the in-app screens to pair your device to your WiFi network or your Blue by ADT Extender + Chime. 6.
LED Reference Guide Your Blue Indoor Camera has an LED light on the front of the unit. This quick reference guide will help you understand your system’s status.
LED Behavior Solid Blue Blinking Blue Blinking Green Alternating Green & Blue Double Blink Blue, Repeated Double Blink Green, Repeated Standard Mode: LED Off HomeKit Mode: Blinking Red Slowly Standard Mode: LED Off HomeKit Mode: Blinking Blue Slowly
LED Light Patterns – Amazon Alexa State Alexa Microphone Off Alexa Core – Listening, Thinking, Speaking Alexa Alerts – Timers, Alarms, Reminders Alexa Notifications – Notification Arrives, Notification Queued Alexa Device Change – Volume Changes Alexa Error – System & Device Errors, Alexa Service Unavailable Alexa – Configuration Change – Factory Reset, Wake Word Change Alexa Idle Alexa Call Drop-in Alexa Do Not Disturb Privacy On
LED Behavior Solid Red Alternating Cyan and Blue Alternating Cyan and Blue Solid Yellow Solid White Solid Red Solid Orange LED Off Blinking Green Solid Purple Solid Red
On-Device Storage Your camera supports on-device storage using a Class 10 or better SD card with minimum storage of 16GB and a maximum of 128GB. Factory Resetting Your Blue Indoor Camera To factory reset your device, press and hold the button on its back for greater than 10 seconds while the device is powered on. Setting Up Amazon Alexa To pair your Blue by ADT Indoor Camera with Alexa: 1. C lick on Settings > Devices then choose the device you would like to add to Alexa. 2.
Important Safety Information 1. Read and keep these instructions. 2. Heed all warnings. 3. Clean only with a dry cloth. 4. Set up in accordance with the manufacturer’s instructions. 5. Do not place this device in a confined space such as a bookcase or similar unit without proper ventilation. 6. Do not set up near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 7.
Regulatory Approvals FCC Statement (US) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules.
Warranty For Blue by ADT warranty details, visit: www.BluebyADT.com/warranty Questions Give us a call at 877-464-7437 or visit us at www.BluebyADT.com/support Company Address LifeShield, LLC 2021 Cabot Blvd.
© 2019. LifeShield LLC dba LifeShield, An ADT Company. All third party marks are the property of their respective owners and used under license. Unauthorized use is strictly prohibited. www.BluebyADT.