ADOMAX TECHNOLOGY CO.,LTD FCC ID: MNL98929110077 Requirements Specification For AM-1300UP; AM-1300U 27MHz Wireless 3D Mouse Date: 91.09.01 Revision: 1.
Contents 1.0 SCOPE.................................................................................................................................................................................3 1.1 DOCUMENT ......................................................................................................................................................................3 1.2 PRODUCT FEATURES..................................................................................................................
Wireless 3D Mouse Requirements Specification 1.0 Scope 1.1 Document This document summarizes the requirements for the Wireless 3D Mouse (WLM). 1.2 Product Features • • • Wireless mouse eliminates cable between mouse and the PC 800 dpi 3D mouse 1.3 Product Applications • • • • Laptop PC Desktop PC Operate OS: window 98/2000/ME/XP/MAC OS Includes software driver for window 98/2000/ME/XP/MAC OS 2.0 Items 2.1 Applicable Documents N/A 2.
The mo use unit and base unit block diagrams are shown in Figures 2 and 3. Processor • Mechanical encoder interfaces • Data formatting • Power control • ID selection • LED L button R button 3D wheel Radio frequency transmitter and integrated antenna Mouse optical ID button Battery Figure 2.
The mouse unit performance requirements are contained in the Table 2 below. Performance tests shall be performed at 20 ± 5 °C (temperature) and 65 ± 10% (relative humidity). Table 2. Mouse Unit Performance Requirements Rqmt No. 3.1.1.2.2.1 Parameter Battery Description Type of battery 3.1.1.2.2.2 Battery Expected life of battery Operating conditions 4h/day 5d/week 15% usage Operating force 3.1.1.2.2.3 3.1.1.2.2.4 3.1.1.2.2.5 3.1.1.2.2.6 3.1.1.2.2.
3.1.2 Interface Description 3.1.2.1 Mouse Unit Interfaces The mouse unit external interfaces are contained in Table 4 below. Table 4. Transmitter Main Unit External Interface Requirements Rqmt No. 3.1.2.1.1 Interface 8 ID select Description ID select switch Value SWITCH 3.1.2.2 Base Unit Interfaces The base unit external interfaces are contained in Table 5 below. Table 5. Base Unit Interface Requirements Rqmt No. 3.1.2.2.1 Interface 8 ID select Description 8 ID select switch Value SWITCH 3.1.2.2.
3.1.3.2.1 Outline dimensions Length Width Height Maximum length Maximum width Maximum height 42mm 25mm 11mm 3.1.4 Maintainability No maintainability shall be required for the base unit. The mouse unit shall use standard commercially available batteries. 3.1.5 Environmental Conditions The mouse and base units shall function over the following conditions. The unit will be used for indoor use. Table 8. Environmental Conditions Rqmt No. 3.1.5.1 3.1.5.2 3.1.5.
3.1.6.6 Heat cycle test (complete unit) 3.1.6.7 After this test, mouse shall be left at room temperature for 1 hour, relative humidity < 95% PCB heat cycle test 3.1.6.8 After this test, mouse shall be left at room temperature for 1 hour, relative humidity < 95% Shock test High temperature Low temperature Dwell time Total cycles High temperature Low temperature Dwell time Total cycles Total cycles Height Floor condition Level Cycles Conditions Function 3.1.6.
Single sticker on bottom of unit – CUSTOMER will provide sticker film and computer files. CUSTOMER shall provide the sticker material type. Sticker shall be serialized. 3.1.7.3.2 Base Unit Labeling Silkscreen of company logo on top of unit – CUSTOMER will provide silkscreen film and computer files. Single sticker on bottom of unit – CUSTOMER will provide sticker film and computer files. CUSTOMER shall provide the sticker material type. Sticker shall be serialized. 4.0 Quality Assurance Provisions 4.