User manual

ManualsBrandsADJ ManualsFlood LightJelly par profile sys

User Instructions

Jelly Par Profile System Introduction

©American DJ® - www.Americandj.com - Jelly Par Prole System User Manual Page 2

2/12

Unpacking: Thank you for purchasing the Jelly Par Prole System

by American DJ®. Every Jelly Par Prole System has been thoroughly

tested and has been shipped in perfect operating condition. Carefully

check the shipping carton for damage that may have occurred during

shipping. If the carton appears to be damaged, carefully inspect your

xture for any damage and be sure all accessories necessary to oper-

ate the unit has arrived intact. In the case damage has been found

or parts are missing, please contact our toll free customer support

number for further instructions. Do not return this unit to your dealer

without rst contacting customer support.

Introduction: The American DJ® Jelly Par Profile System is part of a

continuing pursuit to create high quality intelligent lighting. The Jelly

Par Profile System is an exciting all-in-one DMX intelligent LED par

system. This lighting system features four RGB color mixing LED fix-

tures. This xture can be used in a stand alone mode or connected in

a Master/Slave conguration. This system has six operating modes:

Sound Active mode, Auto mode, Built-In Program mode, Static Color

Mode, RGB dimmer mode, and DMX control mode.

Customer Support: American DJ provides a customer support line, to

provide set up help and to answer any question should you encounter

problems during your set up or initial operation. You may also visit us

on the web at www.American DJ.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (323) 582-3322

Fax: (323) 582-3108

E-mail: support@AmericanDJ.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ.

PLEASE recycle the shipping carton when ever possible.

Summary of content (10 pages)

PAGE 1
Jelly Par Profile System Introduction Unpacking: Thank you for purchasing the Jelly Par Profile System by American DJ®. Every Jelly Par Profile System has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact.
PAGE 2
Jelly Par Profile System General Instructions To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference.
PAGE 3
Jelly Par Profile System Set Up Jelly Par Profile System Power Supply: The American DJ Jelly Par Profile System contains a automatic voltage switch, which will auto sense the voltage when it is plugged into a power source. With this switch there is no need to worry about the correct power voltage, this unit can be plugged in anywhere. cables. Do not DMX+,DMX-,COMMON use the ground lug on the XLR connector.
PAGE 4
Jelly Par Profile System Operating Instructions LED Display On/Off: To make the display stay ON all of the time press the MODE and UP buttons at the same time. To make the display turn OFF after 20 seconds, press the MODE and DOWN buttons at the same time. Operating Modes: The Jelly Par Profile System has six operating modes: • Sound-Active mode - The unit will react to sound, chasing through the built in programs. • Built-In Program - There are 25 built-in programs to choose from.
PAGE 5
Jelly Par Profile System Operating Instructions their own programs tailored to their own individual needs. This function also allows you to use your fixtures as spot lights. The Jelly Par Profile System has 3 DMX modes: 6 Channel mode, 12 Channel mode, and a 15 Channel mode. See pages 12-15 for each modes’ DMX traits. 1. This function will allow you to control each individual fixture’s traits with a standard DMX 512 controller. 2. To run your fixture in DMX mode press the MODE button until “d-P.
PAGE 6
Jelly Par Profile System RFC Operation The RFC remote (sold seperately) has many different functions and allows you to control your Jelly Par Profile System from long distance. The RFC remote can control your system up to 150 ft. To use the RFC you must first activate the fixtures receiver, to activate the receiver please see the instructions on page 10. BLACKOUT - Pressing this button will blackout the fixture. AUTO RUN - This button will run an automatic program.
PAGE 7
Jelly Par Profile System Channel Value 6 Channel DMX Mode Function 5 PROGRAMS CONT. 230 - 239 PROGRAM 24 240 - 249 PROGRAM 25 250 - 254 AUTO PROGRAM SEQUENCE 255 SOUND ACTIVE 6 MASTER DIMMER 1 - 255 0% - 100% Channels 1, 2, and 3 will not work, when Channel 5 is being used. When Channel 5 is being used, Channel 4 will control the program speed. When Channels 1, 2, and 3 are being used, Channel 4 will control strobing.
PAGE 8
Jelly Par Profile System Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Value 1 - 255 1 - 255 1 - 255 1 - 255 1 - 255 1 - 255 1 - 255 1 - 255 1 - 255 1 - 255 1 - 255 1 - 255 0 - 15 16 - 255 1 - 255 15 Channel DMX Mode Function RED (PAR 1) 0% - 100% GREEN (PAR 1) 0% - 100% BLUE (PAR 1) 0% - 100% RED (PAR 2) 0% - 100% GREEN (PAR 2) 0% - 100% BLUE (PAR 2) 0% - 100% RED (PAR 3) 0% - 100% GREEN (PAR 3) 0% - 100% BLUE (PAR 3) 0% - 100% RED (PAR 4) 0% - 100% GREEN (PAR 4) 0% - 100% BLUE (PAR 4) 0% - 100% STR
PAGE 9
Jelly Par Profile System Warranty Jelly Par Profile System Notes MANUFACTURER’S LIMITED WARRANTY A. American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American Audio products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories.
PAGE 10
Jelly Par Profile System Specifications Model: Jelly Par Profile System Voltage: LEDs: Working Position: Power Draw: Fuse: Weight: Dimensions: Colors: DMX Channels: Warranty: Foot Controller Weight: Dimensions: 90V ~ 240V/50~60Hz 109 x 10mm LED’s Per Unit (26 Red, 46 Green, & 37 Blue) Any safe working position 50W Max. (Entire System) 1 Amp 12lbs./ 5.1Kgs. 47.25” (L) x 11” (W) x 2.