@) fates Power OF Ary Byblos-Powdr UF feature Is built in to conserve power, ‘When: {ie Transceiver is left unused with the power switch EE bi for Je unites, the Transceiver will generate Heaping Aldrin Alter the alarm, the Transceiver will automatically extinguish the most of the display and reduce the power consumption to approximately Sma, rude) a} Prosy the BEST button while pressing the Function button AMT wilt appear on the display to Indicate the set mods.
(0) Preparation for paging 1) Program individualism code. 8) Program a.group doge, HOT: A group code must Be common for all members of the bugging. Both individual and group codes must be & number of 3 figures. Example: To program an individual code 001 for the code memory address M3 and a group code 100for M2.
* Group paging # The operating frequency should have been selected prior to usage. Program a group cods to call member stations, a} Press the #/PAGE button while pressing the Function button, Rotate the channel selector 101 the coda memory address ME and set the group cede with numeral buttons: i) Press the "MR JET button for the dial-frequency mode. ©} Press the #/PAGE button forth paging made. A ward “PAG” will appear on the display.
{information} ® A GAPS on the display stops flashing and remains turned on when ary paraffin button Is pressed. # Crass the Fluoridation bullion stop the beep sound halfway, * A group code will be transmogrified when the PTT button is pressed with 83 {your own individual code) selected (This is an improper reparation. « Ar unidentified bode riveter will appear on the display when the reception is incomplete and the individual code of the paging station I8 not cleat.
“Group paging Station A Station B individual Case M3 001 Individual Code M3 602 Group Code M2 100 Group Code M2 100 Recall the stored group coda in aced “M2 C100" will appear on the display to memory address M2 and press the PTT indicate that the Station is paged with the button, Stations having the identical group group code.
NOTE: Adding or subtracting the shift frequency from the receive Tragicomedy makes the transmit frequency. Be sure that the transmit frequency fs within the operating frequency range, SCOFF will appear on the display of the HH Transceiver and transmission ls disable If the transmit frequency happens to be out of the barge. 2, Paging Operation For the PAGE or C80 operation by using the repeater, use the procedure described below.
(24 Setting a Shift Frequency TT [FETISHIST A Button] A shift frequency for repeater operation can be hanged within the limits of 0.00MHz to 88.895MHz. An independent shift frequency can be programmed for sate memory. Procedure a) Press the SHIFTY button while pressing the Function button: The current shift frequency in remarry will be displayed. (The shift frequency is initially section 0.
“5 ADI Communications ONE YEAR LIMITED WARRANTY ® ADI Communications Corp. warrants this product against defects in material and workmanship. @ In the unlikely event of any failure due to defect in material or workmanship, occurring within one year of purchase, this product will be repaired or replaced at our discretion at no charge.