AR-147 . AR-247 AR-447 USER'S MANUAL cations Cork ADI Communications CT DROMEDARY T De Ext portion. MOBILE TRANSCEIVER Communications Thank you for purchasing this VHF/UHF mobile transceiver. IMPORTANT Pleas read this instruction manual carefully before tempting operation, SAVE THIS INSTRUCTION MANUAL.
1. BEFORE OPERATION 2, SPECIFICATIONS... 3B. ACCESSORIZE, 4. INSTALLATION INSTRUCTION 5 REPEATER OPERATION & Transmitter Offset. 8 Automatic Repeater Offset, 5. OPERATION. .. Fie verse Clinician. 4 CONTROL FUNCTION, Torah Oration RECEIVER OPERATION SICS Tone Selection Reception BOS Coda Selection. Frequency Selector COSSETTED FEATURE SELECTION Frequency Step Selection. UTES Tons/DOS Code Soar TRANSMITTER OPERATION Squelch System} OPERATION. Transmit Basics... PAGING... SN Time-out Timer{TOT).
Do nol touch the power plug whee your hands are wet, CLEANING 1. Turn the power off, before cleaning the unit. 2. Do not use any type of abrasive pad, thinner , bend or any substances which may damage tha unit, 3.
ACCESSORIES Unpack your new transceiver carefully, and examine it for visible damage If the equipment has been damaged in shipment, notify the transportation company immediately, Save the boxes and packing material for future shipping. The following accessories should be included in the box with the transceiver, DIME Microphone MAD, aor Dynamic Microphone {GENERAL market only) MC, Hex wrench. Stacking plate DE power Cab instruction Mani: Warranty Lard. 1 aE, INSTALLATION INSTRUCTION 4.
4-2-2 Fixed Station A regulated DO power supply (13.8 VOU capable of supplying at less 11 Amperes) is required, . Ever connect the AC power cable to the AC unt all other connections have hear made. Before connecting and disconnecting ths power connector, be sure fo turn OFF the POWER switches of both the Iran of and the DC power supply. Observe polarity of the DG power castle, The Transceiver operates on 10.8 VOU, negative ground. Battery polarity must be correct.
Hlapgansum SmmaaasampeoBoilng fo 1 VENOM kay This key is used to VFO operation after operating in the MH or GALL channel mode, Pressing this koy will allow the fuming control and microphone UPON keys to restraint or decrease the ingratiating frequency. Press und hold the key for longer fan 1 second to initiate VFO Sean. Pressing the key after scan has been initiated wil cause 5080 10 S10p. Pressing the key within 10 seconds of pressing the F kay will copy the memory harmed! or call charmer date to the VFO.
@) OUTHIT key Erasing this key aloes to select the PAG, CSG function Hf the DIME hoard is installed, Otherwise, & BU-sound will be generated, Pressing the F key for longer then 1 second and pressing the DIME kay wil turn the BEEP function OFF or ON 5442 LOD Display Panel arr On when the Time Out Timer function has been activated. SCAN On when the VFO/MA STAN function has been activated. on Or when the Busy SCAN flag fs active. EPA On when the WIDTH PAGING Tunic active, FHO.
EVE kay This key functions just ile the VEC toy or ie front of the radian. BMF key This kay functions jut fie the MR key an the front of the mda. (© He kay This key frictions us es the Biz ey on he Bird edge edn, @ 16-Tone DTM keypad These buttons are used to meantime th LOCK key he DTM erode. This. key wit deactivate alt factions of the microphone except fe PTT friction and DIME key pad. 5-2 RECEIVER OPERATION Audio confirmation Is provided whenever a front panel key is depressed.
4, Notate the waning control or press the UPON switches on the microphone until the desired tuning step size appears in the play. 5. To complete the programming of the spat size you can press any kay on the from panel except the PWH key, or simply wait 10 seconds and fe microphones will automatically reline 10 the normal frequency display. 5-3 TRANSMITTER OPERATION Caution 1.
Ge-4 Specific Memory Channels This transceiver provides 81 Memory Mechanistically channel interlude. inv addition 10 serving as a normal Memory Channel, same of the Memory Channels serve a dual purpose to specify other parameters. The functions of those Memory Channels are described below, @ Memory Channel {is used fo sire the frequency for the DUAL. WATCH function.
Mote Mamore channel 1 cannot be cleared, 5-4 STAN When the scan function is indicate he standing mode. 5.851 Scan Operation The following saran pianos are available; . Band cai Sean pre VFO mode only Programs Thais soar frequency range is deters Memory Channels £1 and 12 (Th rods ornery. ory channel Sean Scan proceeds Hugh thews data enters and have not been the Memory Channel mote any} ~ uncles stored in in he VFO Notes $.
4. Sean wil sip whenever a 54 inclination] or a rioted ire. 5. Press any front panel key axolotl LOW kay fo stop scanning, ail fs received (hat activates the BUSY 5.5.8 Memory Channel Lockout The Memory Shanna Lockout functions allows you to temporarily skip unwanted Memory Chines! during Armory Channel scan. 1. Select the MAM kay fa select the Memory Channel mode, 2. Se lo! the Memory Channel that you wish to skip by Using the Turing control or the microphone UPON switches, 3.
for longer than reds he HOMEY hey EEN WE 5-7 REPEATER OPERATION 7-1 Transmitter Phaeton Ab ratio repeaters utilize a separate hereon 2 The obsessive frequency may be dither above of blow that of th frequency, The initial offs: frequency fs shown as be ART AR-AT TH0GRHT MHz -COOKHOUSE “EMH Offset Feature “Yo select the devised transitive o Each fine you press | feature to the next. Ho indicator 3%" Tp Spied effect the desires! offset frequency uss He Tol 1.
CSS TONE FREQUENCY (HZ) 2 Rotate the tuning contra! or press microphone CUPID switches to GREEN salon tho desired DOS code, 653 1 tors | Vez T2008 3. Press any front pane! key io he normal display. Pig | 1100 | 855 | 208 LE es 22s DOS CODE TABLE(The bracketed code is inverse code) ps es O77 | [060) | 182 | (118) | B25 | (586) | 603 | (248) 7 2 3 023 047 | T5875) 9a] | (ash) | £28 | (339) 7 | 3280 | i738 | 28 025 | (4a) | 156 | (285) | 442 | (455) | 535 | (34%) G25 127.3 1 477.
5-8-1 Selecting and Storing the C80 code 5G cote from DOO through 898 oan be dieseled from the VFO rote ant sto memory channel. 58-2 0.54 Code Selection Ween DTM unit DTF1AT [option] is installed, the # Selecting and Storing tha C.SQ care with the VFO < the TIFF key twice 1 it the C,5Q indicator, 2. Press thw F ey, fer p STH key seconds. Tie first dig of the ©.5G code wi fia 3 and the second digit basing to flash, 5. Saffron the second dig by rotating the Luring central 8.
510 PAGING The paging function Is available when the optical DIME unit (DTF147) is installed, The paging function is Elise 1a call all station a group, & specific station, or wail for a call from another station by using MDT Dual Tone Mul Frequency) signaling. Helplessness station 2 Is afield 45.8002 nye Conn 11S A Fag SEMI F145.
For example, the following groups communicates wish pate other, Predetermined frequency T4B.
3, When called with your station ID) cods, the memory number if the local station code can not be decoded, * Br * nappers on the automatically changes to 0. The 10 code of the number 8 is displayed, display, Flashing tas) station code Ct Pan Yyy | Lee Flashing Stand by with group codes 1.
5. Or you can press the Hillock or the microphone MHZ key to clear the decoded of TMF codes. 8. Press PROM BV or MAM key to return 10 the nocturnal frequency mode, 511-2 Slows the CODE Memory ‘You can keep the decoded cote even when you power-on next time § FIREBASE. The procedure is © Press MR/M key to store the code and a long Bl-sound will be generated.
2. Select the desired value with the tuning control or the UPEND key on the histamine, 3. 1 after 10 seconds, ro Key has bean pee sating the original frequency is re displayed. 5-16 BEEP “The esp can be tuned on and off. , the display est level is Press the F key for longer than 1 second, then press the MDT key white he F indicator is flashing, Each time this is done, the beep is muted on and off, Pros the kay for longer than § second, 38 5147 LOCK There are two types of lock functions.
6 KEY FUNCTION LIST {VFO « PRION oy | VED {AHR PHONON wep | SYSTEM RESET ISIAH PTT MIC Rapscallion | m3 | CHANNEL DISPLAY MODE ONION (HL WRING sop | MEMORY CHANNEL CLEAR IF THE HF KEY PRESSED IN § SECONDS.
7 MAINTENANCE 7-1 GENERAL INFORMATION Your transceiver have been factory aligned and tasted to specification before shipment, Under normal circumstances the transceiver will operate in accordance with those operating instructions, All adjustable trimmer and coils in your transceiver have hen adjusted at the factory and should only be readjusted by & qualified technician with proper test equipment. Attempting service or alignment without factory authorization can void the transceiver's warranty.
stalling accessories 4. Remove the hacking from the small cushion provided with the LTF147 and attach it to the back of the DTF147. CAUTION 4, Plug the tree connectors into the sockets in the units, Before installation, he sure fo disconnect the DO power supply, 8. Attach the cable from DTFI47 as shown in Fig 2 or battery, Or damage may devour he equipment, MDT unit DTF147 1. Remove the 2 screws securing the top cover. 2. Carefully remove the top cover, (1g. 1) Fig. 2 Fig. 1 §.