User Manual

Manual of Remote Control

Parameter

⚫ Frequency：315MHZ；

⚫ Work Voltage：7～12V

⚫ Work current：14ma±1ma

⚫ Quiescent current：0uA

⚫ Code：rolling code HCS301；

⚫ Work distance ：80m in the open area with Receiver ；

Learning code(Match the remote with

receiver ):

When the receiver connects with power, the LED of the receiver

light on. Then you press the learn button on the receiver,

receiver LED starts to flash. Press the remote control button

within the 30s, and the receiver LED flashes faster and light

on, it’s mean matching the receiver and remote successfully.

Note: When you press the remote control, the LED of the remote

control will light on. If you keep pressing, the LED keeps

light.

PAGE 1
Manual of Remote Control Parameter ⚫ Frequency：315MHZ； ⚫ Work Voltage：7～12V ⚫ Work current：14ma±1ma ⚫ Quiescent current：0uA ⚫ Code：rolling code HCS301； ⚫ Work distance ：80m in the open area with Receiver ； Learning code(Match the remote with receiver ): When the receiver connects with power, the LED of the receiver light on. Then you press the learn button on the receiver, receiver LED starts to flash.
PAGE 2
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.