Table of contents Safety information Box contents Quick overview Headphones Neckloop Transmitter Accessories Connect transmitter to a sound source RCA phono socket(s) SCART socket Headphones socket Microphone Digital TOSlink socket mains power supply Use Swing digital Use SWING digital headphone version Use SWING digital LR neckloop version Safety lock in the neckloop Listening with the 3.
Safety information UÊ UÊ UÊ UÊ UÊ UÊ UÊ UÊ Before you start operating this device, read these instructions carefully and completely. Please retain these operating instructions so that they are accessible at any time also for other users. The device and especially the power supply are designed exclusively for operation in dry interior spaces. A flawless function is guaranteed for a room temperature of 10 °C to 35 °C.
Safety information for the lithium polymer battery The battery used in SWING is a lithium polymer battery, which was produced in accordance with the most current provisions and safety regulations. The battery can be damaged when misused or if not used according to the specifications, in this case Humantechnik accepts no liability.
Quick overview These operating instructions let you fold the first 2 pages out. These pages show images of the SWING with identification by numbers.
We congratulate you for purchasing your »SWING« headphones. You have chosen a reliable state-of-the-art device. Please review these operating instructions carefully to ensure that you commission the device correctly and that you are familiar with all functions of the device. Connect transmitter to a sound source DC 12V Please switch the sound source off before connecting the transmitter.
Connect transmitter to a RCA phono female connector 28 29 Connect the adapter cable with the RCA phono plugs 29 to the audio connection cable 28. Plug the RCA phono plug into the RCA phono connection of your sound source. Please ensure that the white connection is connected to the white connection of your sound source. Please ensure that the red connection is connected to the red connection of your sound source.
Connect transmitter headphone connector 28 Plug the audio connection cable 28 into the headphone connection of your sound source. You may need the 6.3 mm headphone plug adapter for the connection of the headphones to your sound source. Set the volume of your sound source to an average volume. Connect the transmitter to the microphone (optional) 26 32 The microphone is not included in the contents. It can be purchased from your retailer.
Connect transmitter to the digital Toslink connector DC 12V optical 23 optical AUDIO optical MIC CONNECT AUDIO MIC 24 33 Remove protective ends from TOSlink cable. Connect the optical Toslink cable 33 to the “optical“ connection 24 of the transmitter and connect it with your source of sound. The switch 25 must be set to “optical”. NOTE: Your TV digital output must be set to PCM audio. This would be found in the Audio setup of the TV menu system.
Operating Swing digital SWING digital headphone version Please follow the instructions to use your SWING digital: 1. Switch your sound source on (e.g. TV). 2. Adjust the volume level controller 1 initially to a low volume to protect your ears. The volume increases when you turn the dial in the direction of “5” and it decreases when you turn the dial in the direction of “0”. 3. Please put the headphones on. By opening the speaker arms, the headphones switch on automatically.
Safety break in the neckloop (LR neckloop version only) Please ensure that the safety break is completely closed in the neckloop to guarantee best performance. Please ensure the receiver is worn correctly. Using the the 3.5 mm stereo output (LR neckloop version only) The following accessories can be connected to the 3.
Pairing of transmitter and receiver 2 3 4 If you want to add an additional receiver to the transmitter then the new receiver must first be paired with the transmitter. This is required to ensure that transmitter and receiver recognize each other and that they can transmit the encrypted data. This is only required once for each set of headphones. A maximum of 4 sets of headphones can be paired with one transmitter.
Balance control (SWING digital Headphones and SWING IR LR 3.5 mm socket output only) BAL L + L + CONNECT TONE R R The balance controls the volume distribution between the right and the left ears. Adjust the balance in such a way that you hear equally in both ears. This function does not affect the output of the integrated neckloop with the IR LR receiver. Leave balance control at mid point when using the integrated neckloop.
Volume Control Set the volume to a level comfortable for you by adjusting the volume control. 2 3 4 Transparent cover The transparent cover protects the volume control against unintended adjustment of the volume control and against contamination by dust or fluids. 2 3 2 3 4 4 Remove both rubber covers and click the transparent cover into the openings. Range SWING digital uses the latest 2.4Ghz technology. In optimal cases the range is up to 45 m.
Battery charging A fully charged battery can be used for up to 6 hours listening. The LED 4/13 starts flashing red when the battery is almost empty. The battery should now be charged or swapped for a fully charged battery. The listening time is dependent on the volume control setting and the type of sound you are listening to, e.g. speech or music. 18 After use, place the receiver onto the charging cradle of the receiver without applying pressure. When the receiver is placed correctly the LED 18 will light.
Cleaning and care Transmitter and receiver If the devices are dusty or dirty, please clean them with a soft, clean and slightly moist cloth. Please disconnect the transmitter from the mains supply before you start cleaning. Silicone ear adapters You can easily pull the ear adapters from the headphones. Clean the ear adapters with mild soapy water. Dry the ear adapters well before replacing them.
Important information Chemical Chemie solvents The equipment is designed for listening to domestic audio sources. Other uses are outside the scope of use for this product. Damage or contaimination caused to the equipment caused by use not in accordance with these instructions is excluded from the warranty. The equipment is not waterproof and should be kept away from all fluids. Do not place near any heat sources. Do not place any items on top of the equipment that may cause it to malfunction.
Environmental information/disposal Disposal of used electrical and electronic devices (to be applied in countries of the European Union and other European countries with a separate collection system for these devices). The symbol on the product or on its packing indicates that this product must not be treated as normal household waste, but that it must be returned to a recycling point of acceptance for electrical and electronic devices or that it must be disposed in a Yellow Bin.
Troubleshooting guide Symptoms Cause Resolution LED charge indicators do not illuminate despite battery being inserted correctly into receiver or charging bay Transmitter has no electricity from mains supply. Check whether the power supply is connected to the electrical outlet of the house and at the plug and whether the electrical outlet is working and that no fuse was triggered. The charge indicator is not illuminated, despite the fact that the batteries are inserted.
Symptoms Cause Resolution Receiver does not work – no sound received. Receiver is not switched on. (SWING digital LR) Switch the receiver on by using the ON/OFF switch on the back. (SWING digital LR) No battery in receiver. Insert battery in receiver. Battery in receiver is discharged or not charged. Charge battery or insert fully charged battery. The sound transmission is bad, noisy or it is distorted. Receiver is too far away from transmitter. Move receiver closer to the transmitter.