CM-BT2 Stereo Amplified Neckloop USER'S MANUAL
Content FCC Warning: 1. Introduction 2 Bluetooth Wireless Technology Inside the Sales Kit 2. Getting Started 3 The Bluetooth Amplified Neckloop overview Wearing the Neckloop Charging the Neckloop Turning on and off the Neckloop Set up with the phone for the first time Connecting the Neckloop and phone Disconnecting the Neckloop and phone 3. Using the Neckloop 4. 5. 6. 7. 8.
1. Introduction The Stereo Amplified Neckloop offers users a unique, wireless experience using Bluetooth wireless technology. It is a model of efficiency, offering hands-free, wireless connections between most Bluetooth phones. Smart outline design and comfortable for wearing. The Neckloop is Bluetooth V2.0 compliance. It is backward compatible with audio devices with V1.2 or earlier. Its operation range is up to 10 meters (indoor); operating power mode is Class 2 (-66dBm).
2. Getting Started Notes for connection: u The Stereo Amplified Neckloop Overview 1. After the connection, if you want to connect it automatically the next time you power on the neckloop, set this unit as your authorized device or autoconnected device on your mobile phone menu. 2. After the connection with other devices (B, C, D and so on), if you want to re-connect it with A, you need to disconnect it with other bluetooth units first, then use the menu on A device to connect it again. 3.
u Wearing the Neckloop 8. Quick Reference Guide LED Indicator User State Current Next MFB Press Blue OFF Power On Hold 3s Flash 4x ON/Standby Power Off Hold 3s OFF Pairing Hold 6s Pairing Pairing Passed Flash 4x Standby Connected to the Phone Flash 2x Standby Last Number Redial Standby Voice Dial Call Incoming Answer Call Incoming Reject Talk Flash 4x Blue Flash 4x, Red/Blue Alternating for 2 mins Twice The Neckloop has a built-in rechargeable Li-Polymer battery.
Way 2: Using Car Charger 7. Product Specifications 1. Connect one end of the USB cable into the charging port of the unit, then connect the other end into the USB jack of the car charger. Plug the car charger into the cigarette lighter of your vehicle (See Diagram 2). Model Name: Bluetooth Stereo Amplified Neckloop Bluetooth Compliance: Bluetooth Specifications version 2.1+EDR Supported Profiles: Headset, A2DP, AVRCP and Handsfree Frequency Band: 2.
Ensure both the Neckloop and phone is within 10 meters operating range. There are no obstructions or interference in between. Ensure the phone has the latest and working firmware. Send phone for firmware update. Power off and on the devices if the above steps do not solve the problem. If problem persists after taken all above steps, send the Neckloop to authorized service center. Check with the local dealer.
Pairing the Neckloop and Bluetooth Phone 1. Place the Neckloop and phone close to each other, within 1-meter. 2. Make sure that the phone is on, and the Neckloop is off. 3. Prepare the Neckloop in pairing mode: press and hold MFB (6 seconds) until the Red and Blue indicators flash alternately. Important! Neckloop stays in pairing mode for about 2 minutes. 4. Prepare the phone in pairing mode: refer to phone’s user guide for detail. Pairing procedure may subject to different makes and models.
4. Safety Information Please make sure that your attention is focused, when using Neckloop while driving. Use only adaptor approved for use with this particular device. The use of any other types may be dangerous. Keep the Neckloop and accessories out of reach from children. Turn off the Neckloop prior to boarding an aircraft. Do not use the Neckloop in an aircraft. There may be restrictions on using Bluetooth technology in some locations.
3. Using the Neckloop The Neckloop will support the following features listed. Making Calls Dialing from the Phone: Make calls on the phone in normal ways. Voice Dialing from the Neckloop: If the phone supports voice dialing, push the MFB on the Neckloop twice quickly. When the beep tone is heard, say the desired name (voice tag). Redialing the Last Dialed Number: When no call is in progress, press the MFB twice.