Spec Sheet

4015 Threshold Bolt is a two-point lock that easily
secures a double door entrance.
4015
Threshold Bolt
Function
Adding the 4015 Threshold Bolt to a pivoted bolt MS
®
deadlock allows Maximum
Security for pairs of doors by the turn of a single key. Simultaneously dropping a
stainless steel hexbolt into the threshold and pivoting the massive MS
®
bolt into
the mating door’s stile, the two-point lock secures the entire double door entrance.
The 4015 threshold bolt is harnessed to the rear of the pivoted bolt. It may be
added to any basic MS1850S or MS1850SN deadbolt.
Operation
360° turn of key or thumbturn in basic MS
®
deadlock throws
counterbalanced bolt into opposite door and drop-bolt into
threshold. Key can be removed only when bolts are in a
positively locked or unlocked position.
Specifications
CYLINDER HEIGHT
• Standard threshold bolt rod is sufficient for cylinder height
up to 53-7/16". It is fully threaded and can be cut off for
low cylinder heights. Also available to volume users, cut
and threaded only for specific cylinder heights.
ADJUSTMENT
• Exact adjustment of threaded rod to cylinder heights is
locked in place by hexagonal threshold bolt
STRIKE
• For drop-bolt, a 1/2" diameter hold in metal threshold
is suitable. For non-metal installation, 4005 strike is
available.
THRESHOLD BOLT
• Hexagonal 3/8" flat to flat. Made of stainless steel.
OPTIONS
• For “universal” application, specify 4015-18 with fully
threaded rod for cut off to any cylinder heights below
53". For greater height or precut rod for high volume use,
specify exact cylinder height.
STANDARD PACK AGE
• Packed separately with bolt guide, screws, and
attachment pin. Shipping weight: 1lb.
4015 THRESHOLD BOLT
ALUMINUM
GRADE 1
E8241
4005
STRIKE
BOLT
GUIDE
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ACCESSORIES
A-3