Spec Sheet

The 1000 Turns are designed to operate Adams Rite
MS1847 Deadlocks and the 5017 Wood Door Deadlock.
1000 Turns
Function
1000 Turns are designed to operate Adams Rite MS
®
1847 Deadlocks and 5017
Wood Door Deadlock. 1000-11 and 1000-21 have a rectangular escutcheon for
mounting directly on door. 1000-01 and 1000-02 are without escutcheon, designed
for easy push-nut mounting to door pull or other trim plate.
Specifications
TURN LEVER
• Zinc alloy. Trim finish RC130.
ESCUTCHEON
• Stainless Steel. Trim finish in RC130.
SPINDLES
• Hardened steel, plated for corrosion resistance. First
dash number in order guide indicates spindle parallel
or perpendicular to turn level (turn drawings on back).
Second dash number indicates spindle length “L” (see
dash table on back).
1004 TURN
• 1004 Turn has a longer, more ergonomically-friendly
turn lever.
1015 TURN
• Available with 1016 blank plate for doors from 5/8"
to 2-1/4"thickness. Without blank plate turn available
(for use with cylinder pull) on doors from 7/16" to 2"
thickness. Standard finish 130, Satin Aluminum enamel.
Turn 1015 for use with 5017 lock is designed for wood
door applications.
OPTIONS
• The availability of both perpendicular and parallel drives
in these turns, coupled with the three hub drive positions
of the MS1847 lock, provides several options. Choice of
turn drive position relates directly to the particular lock hub
drive position. Special care in specifying both the proper
turn and lock in ordering is recommended. Chart on the
back of page shows turn positions relative to lock hub
positions. Broken line indicates direction of travel (45°) to
retract bolt (see chart below).
STANDARD PACK AGE
• Individually packaged. -21 and-11 assembled, with
escutcheon. -01 and -02, unassembled, include turn,
spindle, washer and push nut for assembly on the door
pull plate. Shipping weight: 1/16 lb.
1000 TURNS
1000
1000
-01
-02
-11
-12
OF LOCK
TO FACE OF LOCK
DOOR PULL
DOOR PULL
DOOR PULL
PUSH
NUT
HOLE IN DOOR
PULL REQUIRED
WASHER
SPINDLE
TURN
TURN
MAX.
HOLES FOR
#6 FLAT HEAD SCREW
(2 PLCS., SCREWS
NOT FURNISHED)
LOCK
HUB
ESCUTCHEON
OR DOOR PULL
*SPINDLE LENGTH
CSK FOR
#6 FLAT
HEAD
SCREW
PERPENDICULAR
DRIVE
MS1847-09 MS1847-06 MS1847-02
PARALLEL
DRIVE
MS1847-10 MS1847-13 MS1847-11
L*
L*
L*
“A”
“B”
“B”
L* = A + B
L* = A +
“L”
“A”
5/8"
15.9
mm
5/16"
7.9
mm
5/32"
4
mm
1/4"
6.4mm
3/32"
2.4
mm
7/16"
11.1mm
1-1/4"
31.8
mm
1-1/4"
31.8mm
1"
25.4mm
3/32"
2.4mm
NOTE:
9/32"
7.1mm
3/8"
9.5
mm
7/8"
22.2
mm
15/32"
11.9
mm
25/32"
19.8mm
5/8"
15.9mm
1/8"
3.2mm
5/32"
4
mm
7/16"
11.1mm
1/4"
6.4
mm
1-13/16"
46mm
1-5/16"
33.3mm
1/2"
12.7mm
1/4"
6.4mm
1/2"
12.7mm
23/32"
18.3mm
IF “B” DIMENSIONS EXCEEDS 1/4" C’BORE
BACK SIDE AS SHOWN TO FACILITATE
ASSEMBLY. C’BORE REQUIREMENT DOES NOT
AFFECT SPINDLE LENGTH DETERMINAION.
CLEARANCE HOLE FOR SPINDLE OPERATION.
THIS MUST LINE UP WITH HUB IN LOCK.
REFER TO INSTALLATION INSTRUCTIONS FOR
ADDITIONAL INFORMATION.
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsr ite.com
ARM-014-9/14
TRIM
T-1