Instruction Manual 5-in-1 PRO Weather Sensor model 06014RM Package Contents 1. 5-in-1 PRO Weather Sensor 2. Mounting Hardware 3. Sensor Mounting Bracket 4. Instruction Manual IMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE PRODUCT REGISTRATION Register online to receive 1 year warranty protection www.AcuRite.com ►Register a Product Questions? Contact Customer Support at (844) 228-5465 or visit www.AcuRite.com.
Features & Benefits 7 1 2 9 11 3 4 5 8 6 10 5-IN-1 SENSOR 1. R ainfall Collector Funnel 5. T emperature & Humidity Sensors (internal) 2. Solar Cell Panels Converts sunlight into power to run internal aspirating fan. 6. Mounting Point (not shown) Draws ambient air into sensor to reduce solar radiation heating, resulting in more accurate temperature measurement. 8. Wind Direction Vane 7. W ind Speed Anemometer Internal Aspirating Fan 9. Mounting Bracket 10.
SETUP 5-in-1 Sensor Setup 1 Set the A-B-C Switch The 5-in-1 sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the 5-in-1 sensor for temperatures below -4ºF / -20ºC. Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter choice for both the sensor and the companion unit (not included) in order for the units to synchronize.
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of the sensor is critical to the accuracy and performance of this product. 5-in-1 Sensor Placement The 5-in-1 sensor is designed to remain outdoors all year long. Choose an open location with no obstructions above or around the sensor for the most accurate measurements. Important Placement Guidelines Sensor must be within 330 feet (100 m) of companion unit (not included).
-in-1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at least 5 feet (1.5 meters) off the ground in an open area. Higher is better for wind measurement- the National Weather Service recommends 33 feet (10 meters) high! MOUNTING OPTIONS The included mounting bracket is designed to screw directly onto wooden posts or surfaces that are 2”x 4” or larger. The sensor can also be mounted directly to 3/4” steel pipe (available at hardware stores and home centers).
Calibrate the Rain Gauge The rain gauge on the 5-in-1 sensor can be calibrated to improve accuracy. Items Needed: 5-in-1 sensor, companion unit, plastic cup, pin, screw driver 1. First, ensure 5-in-1 sensor is perfectly level using built-in bubble level. 2. Use compatible companion unit or AcuRite software to monitor during calibration. 3. Make a pin hole in the bottom of a plastic cup.
Specifications TEMPERATURE RANGE Outdoor: -40ºF to 158ºF; -40ºC to 70ºC HUMIDITY RANGE Outdoor: 1% to 99% WIND SPEED 0 to 99 mph; 0 to 159 kph*; 0 to 86.
Weather Stations Temperature & Humidity Weather Alert Radio Kitchen Thermometers & Timers Clocks It’s More than Accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence™. www.AcuRite.com Printed in China 06014RM INST 090215 ©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147.