Installation Guide

Instruction Manual
Window Thermometer
models 00315 / 00316 / 00317 / 00318
Placement
For the most accurate temperature readings, place your thermometer in a location that is
OUT OF DIRECT SUNLIGHT. This unit can be mounted on a window using the included
suction cup. For the best performance, clean the area where you want to adhere the
thermometer. Moisten the suction cup and then press it evenly onto the clean surface.
Occasionally, suction cups will not adhere well in very cold temperatures. In this case, it
may be necessary to re-apply the suction cup.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
1
2
3
Unpacking Instructions
Remove the protective lm that is applied to the
LCD screen prior to using this product. Locate the
tab and peel off to remove.
Features & Benets
1. Suction Cup Mount
Easily mounted on a window.
2. Current Temperature
Displayed in degrees Fahrenheit.
3. Min/Max
Daily temperature records.
Power On
This thermometer includes a “CR-2032”
battery that is already installed. Remove the
plastic insulator tab to activate the battery and
thermometer display.
NOTE: The initial
temperature reading
may be higher than
the actual temperature
due to the heat from
your hands warming
up the case.

Summary of content (4 pages)