ACUMEN Acumen EON/C AL PT Programmable Fire Control Installation and Operation Instructions: The Enactment EON/CAL PT Programmable Remote Control is designed for use with decorative gas fireplace and wall heaters Using SIT 825 Nova gas valve.
1:0 Installation Instruction 1.4: Installing the Receiver WARNING: TURN ELECTRICAL POWER OFF AT THE CIRCUIT BEAKER BEFORE BEGINNING THIS INSTALLATION: 1 Connect the electrical service wires to thi junction Box of the fireplace, 2. ‘Connect the power box and the receiver of Remote Receiver as shown'in Figure 1: Figure] 3. Connect the black power cord provided to the Rioter Receiver: ©. Pace the receiver anti the base pan of the fireplace. The cooling fan must be facing inward for desire cooling operation.
Figure 4 4.2: Installing the Charger 10 Plug the power cord of the: Charger toa wall socket 2:1: Put the Remote Transmitter onto the Charger whenever if is notion use in order to keep the rechargeable batteries inside fully charged: 2.0 Operation Instructions: 2.1 Transmitter Operation The EON FAC 02 Programmable Rioter Control has 4 operating modes: They are; System ON. Manual on/off, flame height and fan speed adjustment. 214 Program the Thermostat 1.
6. Use the Up and Down bunions to set the number of days you are away. Then press the Enter button. 7. You can cancel the Vacation Override at anytime: Press the PRIG INT button, then use the Up or down bunions to. choose YES and press the: Enter button to-cane! the Vacation Override. 214, Child-Proof Function : 1... Remove the cover at the back of the Rewrite Transmitter fo expose the CHILD-PROOF switch. 2.
3.0 IMPORTANT SAFETY FEATURE: You can set'a private code into your system to prevent accidental operation by another transmitter nearby. See Figure: 5: 3.4: Coding Instructions: 1 There are code switches at the hack of the Remote Transmitter. Slide the code switches to you choice of ON or OFF positions: FACTORY: SETTING IS ALL "QFE. 2.