User Manual

ManualsBrandsAcuity Brands Lighting ManualsElectronicsBRM1

Table Of Contents

5015 B.U. Bowman Drive Buford, GA 30518 USA

Certification Exhibit

FCC ID: 2ADCB-BRM1

IC: 6715C-BRM1

FCC Rule Part: 15.247

ISED Canada Radio Standards Specification: RSS-247

Project Number: 72128840

Manufacturer: Acuity Brands Lighting, Inc.

Model: BRM1-1, BRM1-2

Manual

Summary of content (4 pages)

PAGE 1
Certification Exhibit FCC ID: 2ADCB-BRM1 IC: 6715C-BRM1 FCC Rule Part: 15.247 ISED Canada Radio Standards Specification: RSS-247 Project Number: 72128840 Manufacturer: Acuity Brands Lighting, Inc. Model: BRM1-1, BRM1-2 Manual 5015 B.U.
PAGE 2
USER MANUAL BRM1 BLE Beacon This product is a BLE beacon that is incorporated into lighting fixtures. It integrates with geolocation devices that use either both or only one mode of VLC (Visual Light Communication) or BLE. Location accuracy depends upon the user’s phone position relative to the lighting fixture. For optimum location accuracy, the phone should be allowed for VLC communication, by performing the following steps: 1. Locate mobile directly underneath lighting fixture. 2.
PAGE 3
There are 2 SKUs each providing a singular radiated antenna solution with the BRM1 module: 1. using an internal chip antenna, and 2. providing a unique RF connector for external antenna connection. The internal chip antenna option incorporated in the design is manufactured by Johanson Technology (part number 2450AT18A100E) and it has a peak gain of +0.5 dBi (see reference radiation pattern from the manufacturer below). The external antenna option will connect to a U.
PAGE 4
BRM1 Regulatory Warning Sheet Warning: Changes or modifications to this device not expressly approved by Acuity Brands Lighting, Inc. could void the user’s authority to operate the equipment. “NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.