ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual 2ADCB-ACWIFI001 User’s Manual THIS DOCUMENT IS ROAM/SSG PROPRIETARY Page 1/13
ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual REVISION HISTORY Date Version Description 6/6/2016 1.0 Initial Draft Kayvon Movahed 9/26/2016 1.2 FCC ID and antenna fixed Kayvon Movahed 11/30/2016 1.3 Block Diagram Kayvon Movahed 12/15/2016 1.4 FCC ID typo fixed Kayvon Movahed 12/16/16 1.
ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual Background The 2ADCB -ACWIFI001 radio module is intended for installation in wireless streetlight controls applications. The module has onboard regulated 3.3Vdc supply. The module assembly comes with two different antennas; Laid MAF95310 Mini NanoBlade Flex with the gain of 2.79 dBi @ 2.4 GHz and 3.38 dBi @ 5 GHz, and Laird DCF5151C-FNM 1dBi @ 2.4GHz and 2.4 dBi at 5.0GHz.
ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual Antenna port J19 connector THIS DOCUMENT IS ROAM/SSG PROPRIETARY Page 4/13
ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual Functional Block Diagram of the 2ADCB -ACWIFI001 Module 2.4G 2405- 2472MHz 5180-5825MHz 5G 32MHz The 2ADCB -ACWIFI001 radio module consists of three functional entities: 1. Transceiver section – processor, RF transceiver 2. RF section – BALUNs, RF PA, RF filters, RF switch 3.
ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual 6 7 GND PM_TXD 8 PM_RXD 9 10 11 12 PWR PWR PMW1 PM_RST 13 14 15 MCUDBGRX MCUDBGTX GND 16 YAMAR_DATA_PWR Ground Power metering communication Power metering communication Power input 3.3VDC Power input 3.3VDC 0-10V dim control Power metering communication UART debug RX UART debug TX DC communication Ground DC communication Line 3.3VDC 3.3VDC 3.6VDC 3.6VDC 3.3VDC 3.6VDC 3.3VDC 3.3VDC 3.3VDC 3.3VDC 3.6VDC 3.6VDC 3.6VDC 3.
ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual x-rtc-get x-rtc-set x-rtc-usecs [] x-rtc-dump xlog-dump xlog-dump-event xlog-dump-prev xlog-set-event x-dim [ [ []]] x-dimmer x-adctest x-swinfo x-ldump x-timesync x-sens-list x-sens-read x-sens-read-ext x-alarm-set [text...
ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual x-cfgget x-cfgset x-atimer-info psm-register psm-get psm-set psm-del psm-erase psm-dump psm-get-free-space wlan-scan wlan-add ssid bssid...
ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual x-ymr-sof x-nh-sens x-nh-stats x-nh-ver x-nh-fwdl x-nh-md x-nh-peek x-nh-peek8 x-nh-poke x-nh-poke8 x-pwr-dump x-pwr-aux-enable [0|1] THIS DOCUMENT IS ROAM/SSG PROPRIETARY Page 9/13
ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual 3. Antenna Information To maintain compliance with FCC Rules and Regulations, only the following antenna types with gains no higher than what is indicated may be used with this product: For 2.4 Ghz Operation: Flex Trace, max gain: 2.79 dBi Omni, max gain: 1.0 dBi For 5 Ghz Operation: Flex Trace, max gain: 3.38 dbi Omni, max gain: 2.4 dBi 4.
ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual Channel Frequency (MHz) 1 2 3 4 5 6 7 8 9 10 11 36 38 40 42 44 46 48 52 54 56 60 62 64 100 102 104 108 110 112 116 118 120 124 126 128 132 134 136 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 5180 5190 5200 5210 5220 5230 5240 5260 5270 5280 5300 5310 5320 5500 5510 5520 5540 5550 5560 5580 5590 5600 5620 5630 5640 5660 5670 5680 THIS DOCUMENT IS ROAM/SSG PROPRIETARY Page 11/13
ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual 140 142 144 149 151 153 157 159 161 165 5700 5710 5720 5745 5755 5765 5785 5795 5805 5825 The channel mask is the name used to describe the list of frequency channels that a radio can use. The default channel mask for client radios allows them to operate on any frequency from 2405 to 2475 MHz and 5180MHz to 5825 MHz. 6. Warning (Part 15.
ROAM/SSG – A Division of Acuity Brands 2ADCB-ACWIFI001User’s Manual susceptible d’encompromettre le fonctionnement.(3) Cet appareil répond à la conformité des communications radio. For operation in the band 5150–5250 MHz , this device is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p.