Product Overview
AVAILABLE SIZES (Special sizes available upon request)
NOMINAL DOOR SIZE W X H WEIGHT PER DOOR
inches mm lbs. kg.
12 x 12 305 x 305 8 3.6
14 x 14 356 x 356 11 5
18 x 18 457 x 457 15 6.8
24 x 24 610 x 610 22 10
24 x 36 610 x 914 29 13.1
30 x 30 762 x 762 32 14.5
30 x 48 762 x 1219 44 20
Wall or ceiling opening is nominal door size + 3/8” ( 9 mm)
For detailed specications see submittal sheet
SPECIALTY DOORS
Airtight/Watertight
ADWT
Application
• This access door is ideal for use in laboratories, clean rooms,
operating rooms, etc. where an airtight/watertight seal is required
Product Features
• ADWT is a ush access door that has been tested for air inltration
and water penetration
• Door and Frame fully welded
• Continuous Bulb Trim Gasket
• Continuous Stainless Steel Piano Hinge
• Air Inltration : less than 0.01 cfm/sq foot – ASTM E 283
• Water Penetration : no leakage at 15.05 psf – ASTM E 331
ADWT Access Door Specications:
Door / Door Frame: Flush to frame with reinforced edges
Stainless Steel or Steel: 16 gauge door; 16 gauge mounting frame
Hinge: Continuous exposed stainless steel piano hinge
Gasket: Continuous Bulb Trim Seal
Standard Latch:Stainless Steel phillips head screws standard
Optional Latches/Locks: stainless steel allen head screws,
stainless steel spanner head screws
Finish:Stainless Steel ; #4 satin polish
Steel : 5 stage iron phosphate with prime coat of White alkyd
baking enamel
For more information on Acudor Products Inc. visit www.acudor.com or call 800.722.0501
Product specications may change without notice. Acudor is a registered Trade Mark ©2009