Product Overview

AVAILABLE SIZES (Special sizes available upon request)
NOMINAL DOOR SIZE W X H WEIGHT PER DOOR
inches mm lbs. kg.
12 x 12 305 x 305 8 3.6
14 x 14 356 x 356 11 5
18 x 18 457 x 457 15 6.8
24 x 24 610 x 610 22 10
24 x 36 610 x 914 29 13.1
30 x 30 762 x 762 32 14.5
30 x 48 762 x 1219 44 20
Wall or ceiling opening is nominal door size + 3/8” ( 9 mm)
For detailed specications see submittal sheet
SPECIALTY DOORS
Airtight/Watertight
ADWT
Application
This access door is ideal for use in laboratories, clean rooms,
operating rooms, etc. where an airtight/watertight seal is required
Product Features
ADWT is a ush access door that has been tested for air inltration
and water penetration
Door and Frame fully welded
Continuous Bulb Trim Gasket
Continuous Stainless Steel Piano Hinge
Air Inltration : less than 0.01 cfm/sq foot – ASTM E 283
Water Penetration : no leakage at 15.05 psf – ASTM E 331
ADWT Access Door Specications:
Door / Door Frame: Flush to frame with reinforced edges
Stainless Steel or Steel: 16 gauge door; 16 gauge mounting frame
Hinge: Continuous exposed stainless steel piano hinge
Gasket: Continuous Bulb Trim Seal
Standard Latch:Stainless Steel phillips head screws standard
Optional Latches/Locks: stainless steel allen head screws,
stainless steel spanner head screws
Finish:Stainless Steel ; #4 satin polish
Steel : 5 stage iron phosphate with prime coat of White alkyd
baking enamel
For more information on Acudor Products Inc. visit www.acudor.com or call 800.722.0501
Product specications may change without notice. Acudor is a registered Trade Mark ©2009

Summary of content (1 pages)