Installation Instructions

Product model: ABTM-01/ABTM-03/ABTM-05
Product Name
：
Actto Wireless B/T Dual Mouse
Component description:
1.Bluetooth channel switching (short press to switch the
channel, long press for 3 seconds to connect the code.
Channel 1 Bluetooth: blue light
；
channel 2 Bluetooth:
green light
；
channel 3 wireless: white light)
2. Power (on-off) key
3. Battery back cover
4. Receiver storage tank
5. Receiver
6. resolution adjustment key
Battery insertion method
：
1. Open the battery cover at the bottom of the mouse
2. After confirming the (+) -) two levels of a section of AA,
insert it accurately
3. After inserting the battery, close the rear cover of the battery (it is all covered after clicking)
Power (on-off) key
：
1. Turn on the power: push the power button at the bottom of the mouse to on to turn on the power.
2. Turn off the power: push the power button at the bottom of the mouse to off to turn off the power.
Bluetooth connection method:
1. Long press the pairing button on the front of the mouse for 3 seconds, and the light flashes to
enter the pairing mode
2. Activate the Bluetooth function of the device to be connected
3. Select ACTTO BT1 mouse and ACTTO BT2 mouse to connect the device and use the mouse. It
can be automatically identified without installing additional drivers and programs, and can be
connected up to 10 meters
Bluetooth connection (Windows)
：
1. After connecting the Bluetooth receiver to the computer, the Bluetooth icon will appear in the
taskbar of the window
2. Right click the Bluetooth icon and select Add "Bluetooth" device
3. Select the device type to be searched
4. Long press the pairing button on the front of the mouse for 3 seconds to enter the pairing mode.
5. Select ACTTO BT1 mouse and connect the device
6. After the equipment is ready for use, click finish and use the mouse.
※
Before using the product, please check whether a Bluetooth receiver is built in or installed on the
computer. If the Bluetooth receiver is not installed, it cannot be used. Please purchase and install the
Bluetooth receiver before using it.
Bluetooth connection (MAC PC):