Le i. introduction Contacting Technical Support installing the Adapter Hardware IV. Installing the Adapter Software Windows 98 SE Windows ME Windows 2000 V. Configuring the Adapter Encryption Vi. Configuring the Haddock Feature Vil. Configuring File and Printer Sharing WIE, Troubleshooting 1X. Notices X.
i Ee FS Thank you for purchasing the Airborne PCL S02.11b Wireless Adapter, This Wireless Action Electronics prides self on raking high-quality. durable. high-performance Adapter is easy to use and easy to setup. IF your tired of dealing with all those niceness produces. IF you need assistance, the Actionable Te | wires just to connect a laptop to your home network, then take your networking to he bailable 6 am to 11pm Mon Sun (Central | next level with the Activeness PCT 802.11b Wireless Adapter.
Ey 1. Switch off the computer and all connected peripheral devices. 2. Unplug the computer power cord from the wall outlet. 3. Remove the computer's cover. Refer to the documentation that came with your computer for instructions. CAUTION: Always discharge static electricity before handling the adapter, You can discharge static electricity by touching a grounded metal structure, or by using a commercially available grounding strap.
3. insert the Interaction PCI Wireless Adapter Installation CID into your CD-ROM IRE drive. Select CD-ROM Drive and then click Next. Windows 98 SE 1. After you install the PCI Wireless Adapter, New Hardware Wizard” window appears. on your computer. The “Add ick Next. Advice diva 8 8 software program that makes 5 arcs Dion week. 4. Windows locates the 4 "driver file. Click Next to install the driver software. 2.
. The “Interaction PCI $02.11 Wireless Adapter Properties” window appears. (Noes The “SAID” rust be the same as the “ESSIE” on your home gateway or access point. See the documentation that care with your home gateway or access point for more information.) Click OK ro complete the installation process. [Ce 6. The installation is complete. Click Finish . ing the ‘Adapter Software 7. To activate the Wireless Adapter's software, you must restart your computer.
2. The “Interaction PCI 802.115 Wireless Adapter Properties” window appears. as the “ESSIE” an your home gateway of £ came with your home gateway or access point to access its “ESSIE” value) Click OK. Dies Type | Inn | Charcoal) Accordion | Encryption ero [Gin v mn boos: [monastic sso Towed Poe: Save! ET rear J installing the Adapter Software 4. To activate the Wireless Adapter's software, you must restart your computer. Click OK in the “System Servings Change” window to restart.
Co] on 7. Click on the Configuration tb, In the “Primary Network Logon” text bo, located just above the “File and Print Sharing” button, ensure Client for Microsoft Networks is selected {see the first fine on page 181. If nor, click the down arrow and select it from the list that appears. Click OK. 8. The “System Servings Change” windows appears. Click Yes to restart the computer. If you deo not sce this screen, resistors your computer manually.
Depends on Password: Allows you to set both Read Orly and Full Access files 13. Enable sharing by selecting Share As. A default name for the printer will be on the shared file or drive. The level of access will depend on the passwords created in the Share Name text box. Set a password for the printer at chi you enter in the appropriate field. you want to restrict printer use on the network, Set the default printer settings by modifying information on the either tabs of this window.
3. The “Identification Changes” window appears. Tn the Computer Name: text box, enter a name for your compute that is different from all other computer names on the network. In the Work group tex box, enter the Newark name, which is the same for every computer on your network. Click OK to rerun to the “Network Properties” window, then click OK again 1 restart your computer “Vou can change the cm and the hairdresser of this concise Changes as afoot access io network touchiness.
Adapter drivers. You may have had no CD) or the wrong CD inserted in the CD-ROM drive, or the Installation CD may not have been ready when the wizard looked for the drivers. To solve this problem, remove the Wireless Daguerre from your computer and repeat the installation procedure. Make sure that you insert the Installation CID when the procedure indicates. and that you wait for it to come up to speed in the drive.
Canadian Department Of Communications (DOC) Requirements for End Users: Note: The Canadian Department of Communications label identifies certified equipment. This certification means the equipment meets certain telecommunications network requirements. The Department does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that connection to the line is allowed by the local telecommunications company.
GOVERNED BY A SEPARATE END-USER LICENSE AGREEMENT. THIS INTERACTION ELECTRONICS WARRANTY DOES NOT APPLY TO SUCH THIRD-PARTY SOFTWARE. FOR THE APPLICABLE WARRANTY, PLEASE REFER TO THE END-USER LICENSE AGREEMENT GOVERNING THE U OF SUCH SOFTWARE. Obtaining Warranty Service: Customer may contact Interaction Electronics Technical Support Center within the applicable warranty period to obtain warranty service authorization.
Regulatory Compliance Notices Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.