Quick Installation Guide

ManualsBrandsACTi ManualsCamera & Photo1.3 Megapixel Outdoor IR Network Vandal Dome Camera, 3x Lens

This guide contains the basic information you need to quickly setup the

Camera. For detailed information on installations or operations, please refer

to the Hardware Manual and Firmware Manual on ACTi website

(www.acti.com).

Step 1: Unpack the Device

Check the camera package and make sure all items are present. The

complete package list is shown on the camera Hardware Manual.

Step 3: Connect the Device

Basic Connection Example

Camera

Step 2: Mount the Device

Mounting varies per camera model. Check the most suitable mounting

method from the Hardware Manual or from our Mounting Accessory

Selector Tool (www.acti.com/mountingselector).

Power Source

PoE Switch

Camera Camera Camera Camera Camera Camera

Summary of content (4 pages)

PAGE 1
Quick Installation Guide This guide contains the basic information you need to quickly setup the Camera. For detailed information on installations or operations, please refer to the Hardware Manual and Firmware Manual on ACTi website (www.acti.com). Step 1: Unpack the Device Check the camera package and make sure all items are present. The complete package list is shown on the camera Hardware Manual. Step 2: Mount the Device Mounting varies per camera model.
PAGE 2
Step 4: Access the Device On Network with DHCP Server / Router (Automatic IP) 1. Connect the device and the PC within the same network segment. Once connected, an IP address will be assigned to the Camera. 2. Find the Camera via Windows Explorer or IP Utility. By Windows Explorer a. Go to Start > My Computer > Network. b. Double-click on the device name. By IP Utility a. Download IP Utility from our website (www.acti.com). b. Run IP Utility to start searching for network devices. c.
PAGE 3
On Network without DHCP Server (Default IP) 1. If necessary, configure the IP settings of your PC to match with the network segment of the Camera. Camera Defaults IP Address: 192.168.0.100 Subnet: 255.255.255.0 PC can be assigned with IP Address (different from Camera) Example: 192.168.0.99 Subnet (same with Camera): 255.255.255.0 How to configure the PC IP address? Click Start > Control Panel > Network and Sharing Center > Change adapter settings. Then follow the steps below: 1 3 2 4 2.
PAGE 4
Step 5: Log-in 1. On the Login page, type the Account and Password. Default Account: admin Password: 123456 2. Select Language, if necessary. 3. Click Login. The Live View screen appears. 4. Click to access the Setup menu to modify the Camera settings. For more detailed instructions, please refer to the “Firmware Manual” downloadable from the website (www.acti.com). ACTi Connecting Vision and its logo are registered trademarks of ACTi Corporation.