Tech Drawing

ADVANCED CABLE TIES
PART NUMBER
BUNDLE DIAMETER
A - LENGTH
IN (mm)
+/- 2%
B - WIDTH
IN (mm)
+/- .20 (5.08mm)
C – HEAD SIZE
IN (mm)
+/- .20 (5.08mm)
D – THICKNESS
IN (mm)
+/- .02 (.508mm)
MAX
OPERATING
TEMPERATURE
F (C)
MIN OPERATING
TEMERATURE
F (C)
MIN LOOP TENSILE
LBS (n)
REGULATORY APPROVALS
MAX IN (mm)
AL-08-100-SS-SP-C 1.970 (50.000mm)
7.870
(200.000mm)
.180 (4.600mm) .255 (6.480mm) .010 (.260mm) 1000 (538) -112 (-80) 150 (665) N/A
AL-14-100-SS-SP-C 3.940 (100.000mm)
14.170
(360.000mm)
.180 (4.600mm) .255 (6.480mm) .010 (.260mm) 1000 (538) -112 (-80) 150 (665) N/A
AL-20-100-SS-SP-C 5.900 (150.000mm)
20.470
(520.000mm)
.180 (4.600mm) .255 (6.480mm) .010 (.260mm) 1000 (538) -112 (-80) 150 (665) N/A
AL-08-250-SS-SP-C 1.970 (50.000mm)
7.870
(200.000mm)
.310 (7.900mm) .380 (9.640mm) .010 (.260mm) 1000 (538) -112 (-80) 300 (1,335) N/A
AL-14-250-SS-SP-C 3.940 (100.000mm)
14.170
(360.000mm)
.310 (7.900mm)) .380 (9.640mm) .010 (.260mm) 1000 (538) -112 (-80) 300 (1,335) N/A
AL-20-250-SS-SP-C 5.900 (150.000mm)
20.470
(520.000mm)
.310 (7.900mm) .380 (9.640mm) .010 (.260mm) 1000 (538) -112 (-80) 300 (1,335) N/A
ADVANCED CABLE TIES – SPRING STAINLESS STEEL CABLE TIES
MATERIAL DESIGNATION:
SS = STAINLESS STEEL
MATERIAL:
316 STAINLESS STEEL
SHEET 1 OF 1 REV.: A DRAWING NO.: SS-SP-A
A 5/23/16 JA KT KT INTITIAL RELEASE
DRAWN BY DATE CHECK SCALE
REV DATE BY CHK APPROVE DESCRIPTION
JA 5/23/2016 KT NONE
CONFIDENTIAL PROPERTY OF ADVANCED CABLE TIES, INC.
THIS DRAWING IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF ADVANCED CABLE TIES, INC.
SPC-4.10.88.0