User's Manual

BLUE : Pantone Black C
1:0.700
SCALE: REVPART NAMEPART NUMBER
PROPRIETARY AND CONFIDENTIAL : THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF ACSYS. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF ACSYS IS PROHIBITED.
CONFIDENTIAL INDUSTRY
BLUETOOTH PADLOCK USER MANUAL – VL1BLE
USER MANUAL-ENG
421-020A
Folding Marks
Trim Marks
DIMENSION
WHAT’S IN BOX
70mm
105mm
USER MANUAL
VL1 BLE
Bluetooth Enabled Padlock
[e-mail]
www.acsys.com
Copyright © 2019 Acsys International Ltd.
1
2
3
• Enter Site ID
• Enter Lock ID
• Press Unlock
1
2
3
OPERATE LOCK
• Activate Lock4 • Lock shackle pops out.
Lock is open
5
RECHARGE LOCK
Insert a Micro USB Cable in the chargin port
Connect the other end into a USB wall charger
or a portable power bank
USB charging port
Micro USB Cable
1
• Remove the Dust Cap
to uncover the USB charging port
2
3
While charging, the status light blinks Blue
When the battery is fully charged, the status
light glows solid Blue
4
• Enter Site ID
• Enter Lock ID
• Request CGS+ OTP
• Press Unlock
1
1
2
3
4
2
3
4
OFFLINE MODE
• Activate Lock
4
INSTALL APP
3
• Register the app by following the on-screen instructions
• Search for “Acsys BLE mobile” on your device app store.
• Download and install the app on your device
METHOD 2
1
2
• Scan the QR code
• Download the Acsys BLE mobile app for your respective platform
1
2
METHOD 1
REGISTER LOCK
• Activate Lock
4
1
2
3
• Enter Site ID
• Enter Lock ID
• Press Register
1
2
3
• Lock is registered
5
1
2
3
• Enter Site ID
• Enter Lock ID
• Press Delete
1
2
3
DELETE LOCK
• Lock is deleted
5
• Activate Lock
4
STATUS LED INDICATOR DESCRIPTION
Lock is advertising
Charging in progress
In the first 45 seconds, the lock starts advertising thus flashing a Red Light simultaneously
Lock is connected
Charging done
Solid Blue
R
Solid Blue
Flashing Red
Flashing Blue
B
B
B
LED LIGHT PATTERNS
• Don’t attempt to remove the rechargeable Lithium-Ion battery from this product.
• Only for indoor use
CAUTION
• This user manual is for reference only. Minor differences can be found in user interface.
• Please follow the instructions to set up your device. In case of any issue, please contact Acsys Support
• Specifications may be altered without prior written notice.
NOTE
-10C
+60C
0
95%
without
condensation
WARRANTY
LIMITED
YEAR
1
SPECIFICATIONS
GENERAL
Dimensions & Weight 60 x 23 x 107 mm | 8mm Shackle | 230g
1 year Operations | 3 years Lifetime
Battery Cycle
Lithium-Ion | Rechargeable | Jump-Start
Battery Type
Unicolor LED | displays status of
Bluetooth communication
Battery power level
Battery charging
Visual Indicator
iAMS, Acsys Telecom & Acsys CGS PLUS
Acsys Mobile BLE (iOS Android)
Software and Mobile Apps
FCC STATEMENT
FCC ID:
2AR93-082V1927
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.SPECIFICATIONS
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.