Product Name Version Date AI7687H MT7687 IoT SiP Module A Feb 21, 2017
1. Description AcSiP Technology Corp. introduces a low-cost and low-power consumption IoT module. This stand-alone module is an operating system designed for wearable or internet of things (IoT) devices with smart connection and cloud application/services. AI7687H is a highly integrated SIP module which features an application processor, a low power 1x1 11n single-band Wi-Fi subsystem, a Bluetooth subsystem, and a Power Management Unit.
RX diversity support with additional RX input 2. Specification AI7687H Chipset MT7687 Core ARM Cortex-M4 MCU FPU Clock Speed 192MHz SRAM 352KB SPI Flash 2MB Antenna connector MHF4 series: 20449-001E Operation Condition Temperature Operating : -20℃ ~ +70℃ Storage : -40℃ ~ +85℃ Humidity Operating : 10 ~ 95% (Non-Condensing) Storage : 5 ~ 95% (Non-Condensing) Mechanical Information Dimension 18mm X 18mm X 1.7mm (Typ.
3.
3.1. Detailed Pin Description PIN no. Pin Name PIN no.
4. Operating Block 2.
PuTTY Program Product Name AI7687H MT7687 IoT SiP Module Version Date Page A FEB 21,2017 6 of 9
Command 1. Software operating Connect the board to PC with a serial port cable. Build the example project and download the binary file to the MT7687. Reboot the HDK, the console will show "FreeRTOS Running" message to indicate the HDK is booting up. Use '?' and enter to query the available command line options. Note that the command line options are still under development and subject to change without notice.
with TKIP or AES, the access point SSID is 'myhome' (length 6), and the password of WPA or WPA2 is '12345678' (length 8). config write STA AuthMode 9 config write STA EncrypType 8 config write STA Ssid myhome config write STA SsidLen 6 config write STA WpaPsk 12345678 config write STA WpaPskLen 8 config write common OpMode 1 Press the reset button on the LinkIt 7687 HDK to restart the system. Boot up with the new configuration.
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.