User's Manual

Gunnison Blue Tooth Keyboard User Manual
Bluetooth Keyboard Contents
Thank you for your purchasing Bluetooth keyboard .Before you use this product, please read this manual thoroughly and use
this product correctly. After you read this manual, please keep it in place and refer to it when necessary.
Supplied with the Bluetooth Keyboard:
- Bluetooth Keyboard
- Micro USB Charging cable
Installing Hardware
Step1: Turn the Tablet power to ON, then place keyboard power switch to ON
Step2: Start device’s Bluetooth set up function to search for this Bluetooth keyboard.
Step3: Select SETTINGS > WIRELESS & NETWORKS > BLUETOOTH >ON
Step4: Press the Fn and BT Icon ( ) on keyboard. A blue LED light will flash until tablet and the keyboard are paired.
Step5: Tablet should find the “HP Bluetooth Keyboard Case T800” and then list it as an available device. If it doesn’t, simply
touch Search for devices and it will scan again.
Step6: When the “HP Bluetooth Keyboard Case T800” shows in your list of available devices, touch it to complete pairing.
Note: While pairing for the first time, some tables will trigger a random PIN code, need to input PIN on keyboard to complete
pairing.
Charge
The LED keep flashing, the keyboard is short of power. It is time to charge the keyboard.
Step1: Use the USB charging cable plug into outlet, put one end of the plug into keyboard USB charging cable.
Step2: A Blue light will illuminate to indicate the keyboard is charging. Wait until this light turns off, indicating a full charge. It
usually takes 2-4 hours to completely charge keyboard.
LED Indicator :
Definition
Indicator
Description
Charge with USB cable
Blue
No
LED solid on
When full charge, LED off
Turn on power
(no USB cable attached)
Blue
LED on after 3 seconds LED off
Bluetooth pairing
Blue
LED blinking (1 time/per sec for
2 mins)
Low power
Blue
No
When key in, LED blink
When no action, LED off
No action/No power
No
LED off