User Manual

Bluetooth Keyboard User’s Manual

Step 1). Plug the USB Dongle in a USB port of the PC or notebook. (If the PC or

notebook already has a Bluetooth receiver, then no need the USB Dongle)

Photo(1)

Step 2). Open the cover of the battery slot and install two pieces of 1.5V AAA battery.

Then cover the battery slot. Make sure that the batteries’ poliarities are in accordance

with the polarity marks in the battery slot.

Photo(2) Photo(3)

Step 3). Push the Power Switch to ON as shown in the following phot (4) and then

press the PAIR button. The Bluetooth Synch LED will wink as shown in photo (5).

photo(4) photo(5)

PAGE 1
Bluetooth Keyboard User’s Manual Step 1). Plug the USB Dongle in a USB port of the PC or notebook. (If the PC or notebook already has a Bluetooth receiver, then no need the USB Dongle) Photo(1) Step 2). Open the cover of the battery slot and install two pieces of 1.5V AAA battery. Then cover the battery slot. Make sure that the batteries’ poliarities are in accordance with the polarity marks in the battery slot. Photo(2) Photo(3) Step 3).
PAGE 2
Step 4). The Bluetooth keyboard will automatically search for Bluetooth paired device after the PAIR button was pressed. A corresponding dialog box will pop up on the screen of the PC or Notebook—as shown in the following photo (6). Input the security code which displays on the dialog box by the Bluetooth keyboard and press Enter. When the Bluetooth Synch LED stop winking, it means the Bluetooth connection was established successfully between the keyboard and the computer. photo（6） Step 5).
PAGE 3
approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules.