2.4GHz Multimedia Keyboard & Optical Mouse USER'S GUIDE Ver.:1.
Mouse Buttons 1. 2. 3. 4. 5. 6. 7.
11 multi-media hot keys Low Power & pairing Indicator 107 Standard-Keys Connect Button Battery Cover Setup the Connection between the Receiver and the Mouse, Keyboard. 1. Plug the RF receiver into the USB port of your computer.
2. Insert the batteries into the mouse and keyboard, then follow the steps below. 3. If the mouse or the keyboard is not working, please put them into pairing mode. 4. Pairing: Press the connect buttons on the receiver, mouse and, keyboard. If the mouse or keyboard does not work after 30 seconds, pair the receiver, mouse and keyboard again. 5.The LED indicator on receiver flashes steadily when it is in pairing mode and stops flashing when it is successfully paired with the receiver.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.