SOLIS USER MANUAL Model No.
CONTENTS Safety Instructions ………………………………………3 Amplifier Connections………………………………….4 Speaker Connections……………………………………4 Front and Back Controls……………………………….5 Problem Diagnosis………………………………………..7 Specifications………………………………………………..8 Service…………………………………………………………..
Safety Instructions They’re Important, So Please Read Carefully! Please DO… Keep these instructions in a safe place for future reference – you may need them The SOLIS works best on a clean, dry and flat surface. Try it, you’ll see. The SOLIS needs room to breathe, so made sure it’s new home has adequate ventilation. Don’t put it on beds, sofas, rugs, enclosed bookcases / cabinets or anywhere else where its ventilation maybe obstructed and it can overheat.
from babies and children. Don’t try to remove the cover or the back – there are no user-serviceable parts, and you don’t want to risk an electric shock. NOTE: Any unauthorized changes or modifications to this equipment render the manufacturer’s warranty null and void. Amplifier Connections Before connecting anything to or from your SOLIS, switch off the power to the SOLIS and to components you want to connect.
The Front Power Switch Press to ON for power – the indicator will light up while the power is on. Later on, try pressing it off to give it a rest. Source For switching between Bluetooth and auxiliary in source from different sound inputs like smartphone device, tablet device, CD player etc. Volume Control Full control – you can turn it up or you can turn it down NOTE: Before you switch on, set the volume control to the lowest setting to avoid damage to the speakers.
The Back 5 minute rule! Your SOLIS should only be re-started 5 minutes after switching off to avoid damaging the tubes.
Problem Diagnosis SYMPTONS DIAGNOSIS CURE Won’t turn on when the Power adaptor isn’t Make sure the power POWER switch is pressed connected properly; main supply is off cable is firmly plugged in and mains is switched on No sound The volume control is turned all the way to the left. The connection wires are not connected securely to the INPUT terminals. Speakers are not connected properly Turn the control to the right to crank up the volume. Make sure the cords are fully inserted at both ends.
source, “NOT speaker out”. Test the 3.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.