Weather Resistant Lantern Speaker CONNECT 8 SPEAKERS WIRELESSLY Additional speakers sold separately FOR QUESTIONS OR TECHNICAL SUPPORT Please Call: 1-800-976-0877 Please do not return this product to the store.
TABLE OF CONTENTS Warning & FCC Statement 3 Safety Instructions 4 New Features 5 Unpacking 5 Speaker Component 5 Getting Started 6 Charging Battery 6 3.
FCC WARNING STATEMENT Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio communications.
IMPORTANT SAFETY INSTRUCTIONS 1. Read all instructions and save them for personal reference in the future. 2. Follow all directions for operating the product. 3. Heed all warnings on the product and in the operation instructions. 4. Clean with a dry cloth only. Always unplug the product from any power source before cleaning. 5. Do not use third-party attachments or non-recommended accessories with this product. 6.
NEW FEATURES IPX5 Water Resistance As rated according to International Protection Marking (IP Code), the Monster GLO is rated IPx5 for water resistance capable of withstanding exposure to water jets. This makes the Monster GLO safe n light rain, near splashing drinks, and even around the pool (but not IN the pool!). LED Light Panels The speaker has two LED light panels facing opposite directions. Use the panels to light up spaces after dark, or just to add some color to festivities.
GETTING STARTED • • • Connect the AC cable to the speaker. Plug the AC cable into a wall outlet. Press the Power button to turn the speaker ON (GREEN LED will turn on, and voice confirmation). Speaker will enter Bluetooth pairing mode (BLUE LED will flash). If 3.5mm AUX cable is plugged in, speaker will automatically enter AUX mode. • • CHARGING BATTERY NOTE: Before first use, charge for ~10 hours. • • • Connect speaker to AC outlet via AC power input to charge the battery (RED LED will turn on).
EZ-PLAY WIRELESS CONNECTION (ADDITIONAL SPEAKERS SOLD SEPARATELY) • • • Press the EZ-PLAY button TRANSMIT EZ-Play connection (AMBER LED will flash on TRANSMIT). Press and hold the EZ-PLAY button on another EZ-PLAY speaker for 3 seconds to RECEIVE EZ-PLAY connection (AMBER LED will flash on RECEIVE). When speakers connect, the same audio will play from each speaker (AMBER LED will turn solid). • When connection is established, speakers will automatically connect whenever both are powered ON and in range.
Key Power On / Off Press to turn the speaker ON / Press and hold to turn speaker OFF EZ-Play Bluetooth Volume DOWN (-) Volume UP (+) Color Press to TRANSMIT / Press and hold to RECEIVE Press and hold to enter pairing mode Press to decrease speaker volume Press to increase speaker volume Press to change LED light color Press and hold to turn LED lights ON/OFF Light Volume UP (+) Press to change brightness of LED lights Press and hold to turn LED lights ON/OFF Operating Temp Operating Temperature Range
BTW318 9
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.