2.
Important Information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. Important Safety Instructions 1.
Introduction Welcome Congratulations on your purchase of the 2.4GHz Wireless Stereo Headphones with True 2.1 Sound. The AWD209 uses the latest in wireless transmission, 2.4GHz digital technology, that lets you enjoy crystal clear, uncompressed digital audio up to 100 feet away from the transmitter. The headphones also offer a true 2.1 stereo listening experience, with a patented dual-speaker design in each ear cup.
Getting Started Supplied Accessories This headphone system includes accessories that enable you to use your wireless headphone set in a number of ways. AC power adapter 2.4GHz wireless transmitter Wireless headphones Stereo Y adapter cable (RCA/3.5 mm plugs) Stereo cable (3.5 mm plugs) Charging the Headset Before using your headphones for the first time, charge them for 3.5 hours using the supplied AC power adapter. To charge the headset unit: 1.
Getting Started Hooking Up the Transmitter The 2.4GHz wireless transmitter works with a wide variety of audio sources, from portable MP3 players to A/V receivers to DVD players or gaming systems. The way you hook it up depends on the kind of output you want to use on your audio source. Connecting to a 3.5mm mini-jack output 1. Plug the 3.5mm cable into the headphone jack on your audio source. 2. Connect the other end of the 3.5mm cable to the LINE IN jack on the transmitter’s back panel.
Getting Started Powering the Transmitter The 2.4GHz wireless transmitter runs on regular AC power. LINK DC IN LINE IN Transmitter (back panel) AC power adapter To plug in the transmitter: 1. Connect the round end of the AC power adapter to the DC IN power supply jack on the transmitter’s back panel. 2. Plug the adapter into an electrical outlet. Important: This power unit is intended to be correctly oriented in a vertical or floor mount position.
Buttons & Jacks Right headphone LED indicates charging (red) and communication with transmitter (blue) Power button turns the headphones on and off Volume up/down buttons increase or decrease the headphone volume Link button tunes the headphones to the transmitter 7
Using Your Headphones Turning the Headphones On 1. Make sure the transmitter is plugged in and connected to an audio source. 2. Press the power button on the right headphone to turn the headphones on. 3. Switch on the audio source (TV, DVD, CD player, etc.) the transmitter is connected to. If your audio source is a DVD or CD player, start a disc. 4. Simultaneously press the link buttons on the headphones and on the back of the transmitter.
Using Your Headphones Resetting the Headphones Reset button If you ever want to return the headphones to their factory presets, simply reset the headphones by triggering the reset button on the right headphone with a paper clip. Important Note About Audio Outputs If possible, use a fixed-level (or line-level) audio output from your audio source. This kind of output provides a consistent level of audio that doesn’t change when you adjust the source’s volume control.
Using Your Headphones • Most TVs, regardless of age or price, have variable outputs. If you are unsure which of your TV audio outputs is fixed, refer to the TV instruction manual. Some TVs have outputs that can switch between variable and fixed. When given a choice, fixed is always recommended. Listen safely! Enjoy your headphones at a safe volume. Avoid or limit the amount of time you listen at higher volumes—permanent hearing loss may occur if the headphone is used at too high a volume.
Troubleshooting • • • • Confirm that the headphones are turned on (the LED is blue) and tuned to the transmitter. If the LED on the right headphone is flashing blue, the headphones are not tuned to the transmitter. Press the link key on the headphones and on the transmitter’s back panel to tune the headphones. Check that the headphone volume is turned up.
Month Limited Warranty Audiovox Electronics Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor.
