2.4GHz Digital Wireless HD Headphones™ T R U E Surround 5.
Important Information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
Table of Contents Introduction................................................................ 1 Features....................................................................... 1 Getting Started............................................................ 2 Headphone Buttons & Indicators................................ 4 Transmitter Jacks & Controls....................................... 5 Using your Headphones............................................... 6 Troubleshooting..................................
Getting Started Supplied Accessories This headphone system includes accessories that enable you to use your wireless headphone set in a number of ways. 2.4GHz wireless transmitter AC power adapter Wireless headphones Digital coaxial cable Stereo Y adapter cable (RCA/3.5 mm jack) Stereo cable (3.5 mm jacks) Optical cable Charging the Headset Before using your headphones for the first time, charge them for 3.5 hours using the supplied AC power adapter.
2. Charge the headset. Unhook the charging cable on the transmitter’s back panel. Transmitter (back panel) DC IN C O A X I AL OPTICAL LINE IN Charging cable hook Plug the end of the charging cable into the recharging jack on the right headphone. While the headphones are charging, the LED on the left headphone remains red. This LED turns off when the headphones are fully charged.
Connecting to mini jack or stereo RCA outputs Transmitter (back panel) DC IN COAXIAL O P T I C AL 1. Connect one end of the 3.5mm stereo cable to the LINE IN jack on the transmitter’s back panel. LINE IN 2. Connect the other end of the 3.5mm stereo cable to the headphone jack on your MP3 or CD player. 3.5mm cable 3.5mm cable —OR— Y adapter cable MP3 player/ CD player Left and right audio output jacks on audio source —OR— Connect the other end of the 3.5mm stereo cable to the Y adapter cable.
Transmitter Jacks & Controls Transmitter (back panel) COAXIAL jack connects to a digital coaxial source Antenna OPTICAL jack connects to a digital optical source DC IN jack connects to the AC power adapter Charging cable connects to the headphones’ recharging jack LINE IN jack connects to an analog audio source DC IN COAXIAL OPTICAL LINE IN Transmitter (top panel) Channel select/link button cycles through the transmitter’s broadcast channels; hold for 5 seconds to link to the headphones if the head
Using your Headphones 1. Press the power button on the transmitter’s top panel to turn the transmitter on. Note: Make sure the right input is selected—if it isn’t, press the input select button repeatedly until the LED above the correct input is lit. power button 2. Press the power button on the right headphone to turn the headphones on. 3. Switch on the audio source (TV, DVD, CD player, etc.) to which the transmitter is connected. If your audio source is a DVD or CD player, start a disc. 4.
If you’re using the LINE IN input... If possible, use a fixed-level (or line-level) audio output from your audio source. This kind of output provides a consistent level of audio that doesn’t change when you adjust the source’s volume control. Fixed-level audio outputs from stereo receivers/amps are typically designated as tape or VCR audio output connections, sometimes marked on the component as ‘TAPE OUTPUT,’ ‘TAPE OUT,’ ‘TAPE REC, or ‘TAPE RECORD or REC OUT.
Troubleshooting The following troubleshooting guide takes you through some of the more common problems associated with the installation and/or operation of a wireless system. If the problem persists, please call toll-free 1-800-732-6866 or visit www.araccessories.com. Issue: Cause and solution: No sound • Make sure the transmitter’s AC power adapter is fully inserted into the wall outlet and the power cord from the AC adapter is firmly connected to the transmitter power input jack.
Specifications Transmitter Omni-directional 2.4GHz digital broadcast Dolby Digital 5.1 Surround Sound decoding Effective transmitting range: up to 60ft. (18m)* Audio inputs: Digital optical, digital coaxial, and 3.
© 2007 Audiovox Accessories Corporation 111 Congressional Blvd., Suite 350 Carmel, IN 46032 USA www.araccessories.com AWD510_US_IB_00 Trademark(s) Registered All other brands and product names are trademarks or registered trademarks of their respective owners.