Quick Start Guide
Get set, go! Welcome to ACN Mobile Broadband. This guide details the simple steps to install your go! stick USB modem and connect to the Internet - you’ll be up and running in no time! The package of your ACN go! stick contains the following items: • ACN go! stick USB modem. • ACN go! stick Quick Start Guide. • USB cable. Getting to know your go! stick USB modem 1 2 3 4 5 1 USB Interface: This connects the modem to a computer. 2 SIM/USIM Card Slot: This is where you insert the SIM card.
Windows® installation 1 Insert the SIM card Caution: The SIM card must not be inserted in, or removed from the modem whilst it is connected to a computer. a. Remove the top cap of the modem. b. Remove the card socket from the modem. c. Insert the SIM card into the socket with the golden contact facing upward. d. Flip the card socket and insert in the modem with the SIM card facing down.
3 Wireless Broadband Setup Wizard The installation program will start automatically and the Wireless Broadband Setup Wizard dialogue box will appear on-screen. If the auto-run program does not respond, go to My Computer and double click on the drive labelled “Wireless BB”. Install the program according to the prompts on the screen, as illustrated in the screenshots below. Note: Do not unplug the modem during the installation process. 1. Click Next 2.
• After successful installation, the following dialogue boxes will appear automatically. If not, double-click this shortcut icon on the desktop: 7. Type in the word “broadband”, then click OK 8. To connect to the Internet, click Connect 9. Wait while the connection is Authenticated 10. When the connection is created, the current connection information will be displayed at the bottom of the window, including signal strength, data connection established, and data upload and download speeds.
4 Disconnecting and removing the modem To disconnect your modem: • Double-click the Wireless Broadband icon in the Status Bar on your desktop. 1. Click the Disconnect button next to the Profile Name field 2. Wait while the Wireless Broadband application is disconnecting To remove the modem from the computer: • Double-click the “Safely Remove Hardware” icon in the Status Bar on your desktop • Stop the hardware "HUAWEI Mass Storage USB Device." • At the prompt, remove the modem from your computer.
Troubleshooting If the modem fails to connect, this may be because the USB port on the computer is providing insufficient power. In this case, try connecting the USB cable to the modem and your computer to draw additional current. Further information For information on additional features and FAQs you may wish to refer to the manufacturer user guide. This can be found by selecting Help in the Modem Manager Interface and then Online Help. Alternatively the guide is available at www.acnaustralia.com.au.
Safety information and precautions Please read the safety information carefully to ensure the correct and safe use of your go! stick USB modem. Interference Do not use your modem where it is prohibited to use such a device, or where it may cause interference with other electronic devices. Medical advice • The modem may affect the performance of hearing aids. Please consult your physician.
WEEE approval The modem is in compliance with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE Directive). RoHS approval The wireless device is in compliance with the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2002/95/EC (RoHS Directive). Observance of laws and regulations Please observe laws and regulations when using your modem.
Contact Us www.acnaustralia.com.au Customer Service 1300 881 778 AUMBB.GUIDE v1.