Installation & Assembly

ASSEMBLY INSTRUCTION FOR ACME FURNITURE

MODEL# 92905 92910

Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which may

have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware. Compare

with all parts list to be sure all parts are present. If any part(s) are missing or damaged, please contact your local furniture

dealer. For efficient and speedy service, please indicate the model number and code letter of part(s) needed.

PAGE 1
ASSEMBLY INSTRUCTION FOR ACME FURNITURE MODEL# 92905 92910 Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware. Compare with all parts list to be sure all parts are present. If any part(s) are missing or damaged, please contact your local furniture dealer.
PAGE 2
** Do not fully tighten screws until fully assembled *** COMPONENT PARTS DESCRIPTION PART NAME QTY(PCS) 1 ○ SIDE FRAME 2 2 ○ CROSS BAR 2 3 ○ SUPPORT BAR 2 4 ○ DESK TOP 1 HARDWARE REQUIRED A ○ ALLEN BOLT M6x12MM 5 PCS B ○ ALLEN BOLT M6x32MM 4 PCS C ○ PIPE THREAD M6x13MM 4 PCS D ○ NUT 1 PCS E ○ STUD 4 PCS F ○ ALLEN WRENCH 1 PCS G ○ ALLEN BOLT 4 PCS M6x35MM Attention ***Some number parts listed on the instruction sheet may not be in parts bag as they may already
PAGE 3
STEP.1 E ○ x4 STEP.
PAGE 4
STEP.3 B ○ X4 C ○ X4 STEP.